HP Pavilion TouchSmart 11-e015dx HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 54
TouchPad button board, to which the TouchPad board cable is attached, and then disconnect
View all HP Pavilion TouchSmart 11-e015dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
TouchPad button board Description TouchPad button board (includes TouchPad cable, TouchPad button board cable, and TouchPad button board bracket) Spare part number 730898-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Service cover (see Service cover on page 28) b. Display assembly (see Display assembly on page 37) c. Bottom cover (see Bottom cover on page 42) Remove the TouchPad button board: 1. Release the ZIF connector (1) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the TouchPad board. 2. Remove the two Phillips PM2.0×4.5 screws (2) that secure the TouchPad button board to the top cover. 3. Remove the TouchPad button board bracket (3). 46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts