HP Pavilion dm4-2100 HP Pavilion dm4 Entertainment PC Maintenance and Service - Page 54
Remove the four Phillips M3.0×3.0 screws, Removal and replacement procedures
View all HP Pavilion dm4-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4. Disconnect the hard drive cable from the system board (1). 5. Lift the hard drive out of the hard drive bay (2). 6. If it is necessary to replace the hard drive bracket (also called the protective cover), disconnect the hard drive cable (1) from the hard drive. 7. Remove the four Phillips M3.0×3.0 screws (2) and cover (3) only If the hard drive does not already have these components preassembled. Reverse this procedure to reassemble and install the hard drive. 46 Chapter 4 Removal and replacement procedures
4.
Disconnect the hard drive cable from the system board
(1)
.
5.
Lift the hard drive out of the hard drive bay
(2)
.
6.
If it is necessary to replace the hard drive bracket (also called the protective cover), disconnect the
hard drive cable
(1)
from the hard drive.
7.
Remove the four Phillips M3.0×3.0 screws
(2)
and cover
(3)
only If the hard drive does not
already have these components preassembled.
Reverse this procedure to reassemble and install the hard drive.
46
Chapter 4
Removal and replacement procedures