HP Pavilion dm4-2100 HP Pavilion dm4 Entertainment PC Maintenance and Service - Page 81
Remove the three Phillips M2.5×5.0 screws, that secure the system board to the computer.
View all HP Pavilion dm4-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
f. Speaker assembly (see Speaker assembly on page 70) g. Display assembly (see Display assembly on page 58) h. USB board (see USB board on page 65) i. Power connector cable (see Power connector cable on page 66) j. Bluetooth module (see Bluetooth module on page 68) 1. Turn the computer upright with the left side toward you. 2. Disconnect the optical drive connector cable (1) from the system board. 3. Remove the three Phillips M2.5×5.0 screws (2) that secure the system board to the computer. 4. Loosen the captive screw in the fan sink that secures the system board (3). 5. Lift the right side of the system board (4). 6. Release the system board by sliding it to the right at an angle (5) until the connectors on the left side of the system board clear the base enclosure, and then remove the system board. Reverse the preceding procedure to install the system board. Component replacement procedures 73