HP Pavilion dv4-1100 HP Pavilion dv4 Entertainment PC - Maintenance and Servic - Page 119
to lift the right side of the system board until it rests at an angle., Lift the system board
View all HP Pavilion dv4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
2. Disconnect the power connector cable from the system board. 3. Remove the two Phillips PM1.5×9.0 slotted screws (1), and the Phillips PM2.5×4.0 screw (2) that secure the system board to the computer. 4. Use the optical drive connector (1) to lift the right side of the system board until it rests at an angle. 5. Lift the system board (2). Component replacement procedures 111
2.
Disconnect the power connector cable from the system board.
3.
Remove the two Phillips PM1.5×9.0 slotted screws
(1)
, and the Phillips PM2.5×4.0 screw
(2)
that
secure the system board to the computer.
4.
Use the optical drive connector
(1)
to lift the right side of the system board until it rests at an angle.
5.
Lift the system board
(2)
.
Component replacement procedures
111