HP Pavilion dv6000 HP Pavilion dv6000 Notebook PC Maintenance and Service Guid - Page 176
board cable, and the power connector
View all HP Pavilion dv6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Removal and Replacement Procedures 2. Remove the two Phillips PM2.5×5.0 screws 1 that secure the USB/power connector board to the computer. 3. Release the USB/power connector board 2 as far as the USB/power connector board cable will allow. 4. Disconnect the USB board cable 3 and the power connector board cable 4 from the USB/power connector board. Removing the USB/Power Connector Board 5. Remove the USB/power connector board. Reverse the above procedure to install the USB/power connector board. 5-60 Maintenance and Service Guide
5°60
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Remove the two Phillips PM2.5×5.0 screws
1
that secure the
USB/power connector board to the computer.
3. Release the USB/power connector board
2
as far as the
USB/power connector board cable will allow.
4. Disconnect the USB board cable
3
and the power connector
board cable
4
from the USB/power connector board.
Removing the USB/Power Connector Board
5. Remove the USB/power connector board.
Reverse the above procedure to install the USB/power
connector board.