HP Pavilion xe700 HP Pavilion PC's - (English) Seagate Hard Drive U Series 5 M - Page 20

U Series 5 Family Product Manual, Rev. B 13 The following table lists the maximum vibration levels that the drive may experience while meeting the performance standards specified in this document. 5-21 Hz 22-350 Hz 351-500 Hz 0.02-inch displacement (peak to peak) 0.5 Gs acceleration (zero to peak) 0.25 Gs acceleration (zero to peak) 1.8.6.2 Nonoperating vibration The following table lists the maximum nonoperating vibration that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation. 5-21 Hz 22-350 Hz 351-500 Hz 0.02-inch displacement (peak to peak) 5.0 Gs acceleration (zero to peak) 1.0 Gs acceleration (zero to peak) 1.9 Drive acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are generally consistent with ISO document 7779. Sound power measurements were taken under essentially free-field conditions over a reflecting plane. For all tests, the drive was oriented with the cover facing upward. Note. For seek mode tests, the drive was placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0.4 / (average latency + average access time) ST340823A and ST330621A Acoustic mode Idle Quiet Seek Performance Seek Sound power (bels) 3.0 (typ) 3.2 (typ) 3.2 (max) 3.4 (max) 3.6 (typ) 3.8 (max) ST320413A, ST315311A and ST310211A Acoustic mode Idle Quiet Seek Performance Seek Sound power (bels) 2.9 (typ) 3.1 (typ) 3.2 (max) 3.4 (max) 3.5 (typ) 3.7 (max)