HP Photosmart 433 HP Photosmart 430 series digital camera with HP instant shar - Page 67
lens cover/power, switch, The wrong, date and/or, time is, shown., Date & Time, Setup, The camera
View all HP Photosmart 433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Problem The wrong date and/or time is shown. The camera does not respond when I press a button. Possible cause Solution The batteries died or were removed from the camera for too long. The date and time will be maintained for about 10 minutes without batteries installed. Reset the date and time by using the Date & Time option in the Setup menu. (See page 58) The camera is Turn on the camera, or turn it off turned off or and then on again. has shut down. The camera is connected to a computer. Most of the camera buttons, except for the lens cover/power switch, do not respond when the camera is connected to a computer. If they respond, it is only to turn the Image Display on if it is off, or, in some cases, turn the Image Display off if it is on. The batteries Replace or recharge the batteries. are drained. Images in the memory card may be corrupted. Remove the memory card. The camera has stopped operating. Open the battery/memory card door and then close it. This should reset the camera. Chapter 7: Troubleshooting and support 67