HP Point of Sale rp5000 Computer Setup (F10) Utility Guide (2nd Edition)
HP Point of Sale rp5000 Manual
 |
View all HP Point of Sale rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Point of Sale rp5000 manual content summary:
- HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 1
Computer Setup (F10) Utility Guide HP Point of Sale System rp5000 Document Part Number: 337857-002 June 2005 This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 2
DOS, and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set of information. Computer Setup (F10) Utility Guide HP Point of Sale System rp5000 First Edition (August 2003 Second Edition (June 2005) Document Part - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 3
Contents Computer Setup (F10) Utility Guide Computer Setup (F10) Utilities 1 Using Computer Setup Utilities 3 File 4 System Information 4 About 4 Set On Password 9 Password Options 9 Device Security 10 Network Service Boot 10 System IDs 10 Power 11 Energy Saver 11 Timeouts 11 Energy - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 4
Contents Onboard Devices 14 PCI Devices 14 Bus Options 15 Device Options 15 iv www.hp.com Computer Setup (F10) Utility Guide - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 5
(F10) Utility Guide Computer Setup (F10) Utilities Use the Computer Setup (F10) Utility to do the following: ■ Change factory default settings. ■ Set the system date and time. ■ Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 6
Guide POST error occurs, the error is displayed regardless of the mode selected. To manually switch to Post Messages Enabled during POST, press any key (except F1 through F12). ■ Establish an Ownership Tag, the text of which is displayed each time the system or parallel ports, audio, or embedded NIC - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 7
Guide Using Computer Setup Utilities To access the Computer Setup Utilities menu, complete the following steps: 1. Turn on or restart the computer. If you are in Windows appropriate time and the Windows operating system begins, you must restart restore the original factory system defaults. Ä CAUTION: - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 8
1.44-MB diskette in file CPQsetup.txt. Save/Restore for the HP Drive Key is supported. Restore from Diskette Restores system configuration from a diskette. Save/Restore for the HP Drive Key is supported. Set Defaults and Exit Restores factory default settings, which includes clearing any - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 9
Computer Setup (F10) Utility Guide Computer Setup (Continued) Heading Option Description Storage Device are 3.5" 1.44 MB, 5.25" 1.2 MB, and Not Installed. Save/Restore for the HP Drive Key is supported. Drive Emulation Allows you to select a drive emulation type for a certain storage device. - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 10
(F10) Utility Guide Computer Setup (Continued device. This enables the BIOS to access disks partitioned and formatted on other systems and may be necessary for users of older versions of UNIX (e.g., SCO inaccessible. ✎ Support for specific Computer Setup options may vary depending on your - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 11
Guide BIOS to translate disk I/O requests (from the operating system or an application) into terms the hard drive can Enables/disables ability to boot the system from removable media. Removable Media computer off, then on, manually. ✎ Support for specific Computer Setup options may vary - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 12
Guide disable BIOS use of DMA (direct memory access) for IDE data transfers. IDE for a bootable operating system image. Each device on system source. ✎ MS-DOS® drive lettering assignments may not apply after a non-MS-DOS operating system Support for specific Computer Setup options may vary depending - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 13
Guide Computer Setup (Continued) Heading Option Description Storage (continued) Controller Order (This feature is supported on some models settings under Windows. Also, this password must be set in order to use some HP remote security tools. See the Troubleshooting Guide on the Documentation - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 14
Setup (F10) Utility Guide Computer Setup (Continued) Heading Option Description Security (continued) Device Security Enables/disables Serial ports A, B, C, and D, parallel port, USB ports, system audio, and network controllers (some models). Network Service Boot Enables/disables the - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 15
the system. This option does not affect power management for the ACPI-enabled operating systems. Timeouts Allows you to disable or manually select timeout This option does not apply under ACPI-enabled operating systems. ✎ Support for specific Computer Setup options may vary depending on - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 16
this feature prevents the text from being displayed. However, pressing the F12 key will still force the system to attempt booting from the network. ✎ Support for specific Computer Setup options may vary depending on your hardware configuration. 12 www.hp.com Computer Setup (F10) Utility Guide - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 17
Allows you to set: (continued) • Option ROM prompt (enable/disable). Enabling this feature will cause the system to display a message before loading options ROMs. (This feature is supported on some models only.) • Remote wakeup boot source (remote server/local hard drive). • After power loss (off/on - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 18
this feature will allow Windows operating systems to run optimally. This feature must be disabled for certain non-Microsoft® operating systems to work properly. • ACPI/USB buffers @ top of memory (enable/disable). Enabling this feature places USB memory buffers at the top of memory. The advantage is - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 19
feature is supported on some models only. • ACPI S3 Video REPOST (enable/disable). This feature reruns the video option ROM on a boot from the S3 state. ✎ Support for specific Computer Setup options may vary depending on your hardware configuration. Computer Setup (F10) Utility Guide www.hp.com - HP Point of Sale rp5000 | Computer Setup (F10) Utility Guide (2nd Edition) - Page 20
Setup (F10) Utility Guide Computer Setup (Continued S3 PS2 Mouse Wakeup (enable/disable). Allows the mouse to wake the system from the S3 sleep state. • Monitor Tracking (enable/disable). Allows ROM of option ROMS. ✎ Support for specific Computer Setup options may vary depending on your
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Computer Setup (F10) Utility
Guide
HP Point of Sale System rp5000
Document Part Number: 337857-002
June 2005
This guide provides instructions on how to use Computer Setup. This
tool is used to reconfigure and modify computer default settings when
new hardware is installed and for maintenance purposes.