HP Point of Sale rp5000 Computer Setup (F10) Utility Guide (2nd Edition) - Page 7

Computer Setup (F10) Utility Guide Using Computer Setup Utilities To access the Computer Setup Utilities menu, complete the following steps: 1. Turn on or restart the computer. If you are in Windows®, click Start > Shut Down > Restart the Computer. 2. Press the F10 key when the monitor light turns green to enter Computer Setup. ✎ If you do not press the F10 key at the appropriate time and the Windows operating system begins, you must restart the computer again and press F10 again to access the utility. 3. Select your language from the list and press the Enter key. 4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power, and Advanced. 5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys to select the option you want, then press the Enter key. To return to the Computer Setup Utilities menu, press the Esc key. 6. To apply and save changes, select File > Save Changes and Exit. ❏ If you have made changes that you do not want applied, select Ignore Changes and Exit. ❏ To reset to factory settings, select Set Defaults and Exit. This option will restore the original factory system defaults. Ä CAUTION: Do NOT turn the computer power OFF while the ROM is saving your F10 Computer Setup changes because the CMOS could become corrupted. It is only safe to turn off power to the computer after you exit the F10 Setup screen. Computer Setup (F10) Utility Guide www.hp.com 3