HP Point of Sale rp5000 Computer Setup (F10) Utility Guide (2nd Edition) - Page 13

Computer Setup (F10) Utility Guide Computer Setup (Continued) Heading Option Description Storage (continued) Controller Order (This feature is supported on some models only.) Allows you to specify the order of attached hard drive controllers. The first hard drive controller in the order will have priority in the boot sequence and will be recognized as drive C (if any devices are attached). ✎ This selection will not appear if all of the hard drives are attached to the embedded IDE controllers. Security Setup Password Allows you to set and enable setup (administrator) password. ✎ If the setup password is set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. Also, this password must be set in order to use some HP remote security tools. See the Troubleshooting Guide on the Documentation CD for more information. Power-On Password Allows you to set and enable power-on password. See the Troubleshooting Guide on the Documentation CD for more information. Password Options (This selection will appear only if a power-on password is set.) Allows you to: • Enable/disable network server mode. • Specify whether the password is required for warm boot (CTRL+ALT+DEL). ✎ This selection is available only when Network Server Mode is disabled. See the Desktop Management Guide on the Documentation CD for more information. ✎ Support for specific Computer Setup options may vary depending on your hardware configuration. Computer Setup (F10) Utility Guide www.hp.com 9