HP Pro 2000 Maintenance & Service Guide: HP Pro 2000/2080 Business PC - Page 35
Front Bezel, Preparation for Disassembly, on Access Panel
View all HP Pro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Front Bezel 1. Prepare the computer for disassembly (Preparation for Disassembly on page 25). 2. Remove the access panel (Access Panel on page 26). 3. Press outward on the three latches on the right side of the bezel (1), then rotate the right side of the bezel off the chassis (2) followed by the left side. Figure 6-2 Removing the Front Bezel NOTE: The appearance of the front bezel may vary. To reinstall the front bezel, reverse the removal procedure. Front Bezel 27
Front Bezel
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
25
).
2.
Remove the access panel (
Access Panel
on page
26
).
3.
Press outward on the three latches on the right side of the bezel
(1)
, then rotate the right side of
the bezel off the chassis
(2)
followed by the left side.
Figure 6-2
Removing the Front Bezel
NOTE:
The appearance of the front bezel may vary.
To reinstall the front bezel, reverse the removal procedure.
Front Bezel
27