HP Pro SFF 290 G9 Desktop PC Maintenance and Service Guide - Page 34
WLAN module
View all HP Pro SFF 290 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. To remove a hard drive from the drive cage, remove the four screws that secure the drive to the drive cage (1), and then slide the drive out of the cage (2). To install a hard drive, reverse the removal procedures. WLAN module To remove the WLAN module, use these procedures. For a list of available WLAN modules, see Computer major components on page 4. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 18). 2. Remove the access panel (see Access panel on page 19). 3. Remove the optical drive (see Optical drive on page 23). 4. Remove the drive cage (see Hard drive on page 25). 5. Remove the front bezel (see Front bezel on page 24). Remove the WLAN module: 1. Disconnect the antenna cables from the module (1). 2. Remove the screw (2) that secures the module to the computer. WLAN module 27