HP ProLiant 800 HP ProLiant BL e-Class Integrated Administrator User Guide - Page 82

Command Line Interface Table 4-2: General Management Commands continued Command Description GENERATE CERTIFICATE REQUEST Generates a PKCS#10 certificate request. GENERATE CERTIFICATE SELFSIGNED Generates a self-signed certificate. PING {} [ | ] Sends ICMP echo messages to a remote IP device. If is omitted, only 5 packets are sent. Packets are sent out at 1-second intervals. SET DISPLAY EVENTS [ON | OFF] Turns event notification on or off The Integrated Administrator preserves this setting across all logins. SET EXPERT {MODE} [ON | OFF] Turns EXPERT MODE on or off. When EXPERT MODE is turned on, the system will not prompt the user to confirm actions. Users should exercise caution when working in EXPERT MODE as many actions are not reversible. SET FACTORY Sets the Integrated Administrator back to its factory defaults. The "Administrator" account password does not change. The Integrated Administrator is restarted after all the changes are made. Note: This command removes all groups, users, and other customization from the memory of the enclosure, and the information is unrecoverable. SET SCRIPT MODE [ON | OFF] When SCRIPT MODE is on, all prompting and verifications of entries ceases. If SCRIPT MODE is on, the following commands require a password argument: ADD USER, SET USER PASSWORD, or SET PASSWORD. Default values are used for any parameters that would normally require user interaction. Restrictions Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. The must be in the form where ### ranges from 0 to 255. None None Only the "Administrator" account may execute this account. None continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-5