HP ProLiant BL660c HP BladeSystem Networking Reference Architecture: HP Virtua - Page 6
If additional Ethernet bandwidth is necessary, ports Enc0:Bay2:X5, Enc0:Bay2:X6
 |
View all HP ProLiant BL660c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
As noted in the previous section, Virtual Connect FlexFabric Stacking Links will only carry Ethernet traffic, and do not provide any Fibre Channel stacking options. Thus, ports X1 and X2 from each module are populated with 8Gb SFP+ transceivers, providing 16Gb net FC bandwidth for storage access. Ports X3 and X4 are available to provide additional bandwidth if FC storage traffic is necessary. If additional Ethernet bandwidth is necessary, ports Enc0:Bay2:X5, Enc0:Bay2:X6, Enc1:Bay1:X5, and Enc1:Bay1:X6 can be used for additional Ethernet Networks or Shared Uplink Sets. Figure 1-2: Physical cabling design 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
 |
 |
6
As noted in the previous section, Virtual Connect FlexFabric Stacking Links will only carry Ethernet
traffic, and do not provide any Fibre Channel stacking options. Thus, ports X1 and X2 from each
module are populated with 8Gb SFP+ transceivers, providing 16Gb net FC bandwidth for storage
access.
Ports X3 and X4 are available to provide additional bandwidth if FC storage traffic is
necessary.
If additional Ethernet bandwidth is necessary, ports Enc0:Bay2:X5, Enc0:Bay2:X6, Enc1:Bay1:X5,
and Enc1:Bay1:X6 can be used for additional Ethernet Networks or Shared Uplink Sets.
Figure 1-2:
Physical cabling design