HP ProLiant DL380 G3 with MSA1000 ProLiant DL380 Generation 3 Packaged Cluster - Page 69
Creating Novell Storage Service Volumes, NSS Disk Options, NSS Volume Options, Create, NSS Volume.
View all HP ProLiant DL380 G3 with MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
System Setup and Configuration for Novell NetWare 5.1 Creating Novell Storage Service Volumes To create NSS volumes to be used in the cluster: 1. Type NWCONFIG from the system console. 2. Select NSS Disk Options, Storage, Assign Ownership. 3. Select one logical unit (LUN ) at a time and click Yes to initialize. 4. Repeat steps 2 and 3 for each shared LUN. Exit the utility. 5. Type NWCONFIG from the system console. 6. Select NSS Disk Options, NSS Volume Options, Create, NSS Volume. 7. Select a LUN and give the LUN a name. 8. Click Yes. NOTE: You should receive a message that reads Successfully created the new NSS Volume and added it to NDS. 9. Repeat steps 7 and 8 for each LUN. To configure the second server to see the NSS volumes: 1. Type NWCONFIG from the second server system console. 2. Select NSS Disk Options, Storage, Update Provider Information. 3. Update both the GSEG (Group/Segment Manager) and the MMPRV (NSS Media Manager Provider). Exit the utility. 4. Type NSS volumes from the command console on each server to verify that the servers recognize the volumes. 5-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide