HP ProLiant SL170s HP ProLiant SL170s G6 Server Maintenance and Service Guide - Page 47
System Board Removal and Replacement Procedure
View all HP ProLiant SL170s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 28 Replacing the battery System Board Removal and Replacement Procedure To remove the system board: NOTE: The system board spare part kit does not contain processors or Memory DIMMs. These have to be moved from the defective board and installed on the new board. Follow directions on the removal and replacement of these parts. 1. Remove the six screws that secure the system board to the tray. 2. Release the system board from the tray. Figure 29 Removing the system board from the tray IMPORTANT: Do not discard the screws. If the system board is removed in the future, you must keep them for future use. To replace the system board: Removal and Replacement Procedures 47
Removal and Replacement Procedures
47
Figure 28
Replacing the battery
System Board Removal and Replacement Procedure
To remove the system board:
NOTE:
The system board spare part kit does not contain processors or Memory DIMMs. These have
to be moved from the defective board and installed on the new board. Follow directions on the
removal and replacement of these parts.
1.
Remove the six screws that secure the system board to the tray.
2.
Release the system board from the tray.
Figure 29
Removing the system board from the tray
IMPORTANT:
Do not discard the screws. If the system board is removed in the future, you must keep
them for future use.
To replace the system board: