HP ProLiant SL170s HP ProLiant SL170s G6 Server Maintenance and Service Guide - Page 77

If you have installed a PCI accessory board, verify that the board is firmly seated and any

Get HP ProLiant SL170s - G6 Server PDF manuals and user guides View all HP ProLiant SL170s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

If the POST failure is during a routine boot up, check the following: • All external cables and power cables should be firmly plugged in. • The power outlet to the server should be connected and works correctly. • The server and monitor are both turned on. The bicolour status LED indicator on the front panel must be lit up green. • The monitor's contrast and brightness settings are correct. • All internal cables are properly connected and all boards firmly seated. • The processor is fully seated in its socket on the system board. • The cooler assembly is properly installed on top of the processor. • All memory modules are properly installed. • If you have installed a PCI accessory board, verify that the board is firmly seated and any switches or jumpers on the board are properly set. Refer to the documentation provided with the accessory board. • All internal cabling and connections are in their proper order. • If you have changed any switches on the system board, verify that each is properly set. Diagnostic tools and Setup Utilities 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Diagnostic tools and Setup Utilities
77
If the POST failure is during a routine boot up, check the following:
•
All external cables and power cables should be firmly plugged in.
•
The power outlet to the server should be connected and works correctly.
•
The server and monitor are both turned on. The bicolour status LED indicator on the front panel
must be lit up green.
•
The monitor's contrast and brightness settings are correct.
•
All internal cables are properly connected and all boards firmly seated.
•
The processor is fully seated in its socket on the system board.
•
The cooler assembly is properly installed on top of the processor.
•
All memory modules are properly installed.
•
If you have installed a PCI accessory board, verify that the board is firmly seated and any
switches or jumpers on the board are properly set. Refer to the documentation provided with the
accessory board.
•
All internal cabling and connections are in their proper order.
•
If you have changed any switches on the system board, verify that each is properly set.