HP ProLiant SL270s HP ROM-Based Setup Utility User Guide - Page 45
PCI IRQ Settings (G7 servers), PCI Device Enable/Disable (G7 servers
View all HP ProLiant SL270s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
PCI IRQ Settings (G7 servers) These options configure the legacy IRQ for embedded and slot-based PCI/PCIe devices. Multiple devices can share an IRQ. The PCI Devices menu displays the configuration settings of the PCI devices installed in the server and allows you to modify the IRQ. Multiple PCI devices can share an interrupt. To disable a device, select the device and press the Enter key. A menu is displayed with options to change the IRQ, as well as to disable the device. PCI Device Enable/Disable (G7 servers) These options enable and disable the embedded and add-in devices. Disabling devices reallocates the resources (memory, I/O, and, in some cases, option ROM space) that would normally be allocated to the device, and in some cases, saves the power that would be allocated to the device. NOTE: Only IRQs that are modified in RBSU retain the change during the next reboot. IRQs on PCI devices that have not been modified are subject to change during reboot. IMPORTANT: When the PCI Hot Plug driver is installed on servers with Microsoft® Windows® 2000 or Windows Server® 2003, disabling a single PCI controller also disables all controllers on the same PCI bus. To avoid disabling other controllers on the bus, remove the single PCI controller. RBSU menu (HP ProLiant G7 servers or server blades) 45