HP ProLiant SL270s HP ROM-Based Setup Utility User Guide - Page 91
Node Interleaving (G7 servers), Memory Speed with 2 DIMMs per Channel (G7 servers)
View all HP ProLiant SL270s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Node Interleaving (G7 servers) Node Interleaving disables the NUMA architecture properties of the system. All operating systems supported by this platform support NUMA architectures. In most cases, you can obtain optimum performance by disabling Node Interleaving. When this option is enabled, memory addresses are interleaved across the memory installed for each processor. When this option is enabled, some workloads may see improved performance. Memory Speed with 2 DIMMs per Channel (G7 servers) This option is only available for HP ProLiant DL360 G7 or HP ProLiant DL380 servers configured with an Intel® 5500-series processor. This option does not apply to HP ProLiant DL360 G7 or HP ProLiant DL380 servers configured with an Intel® 5600-series processor. This option configures the system to run DIMMs at 1333 MHz when up to two DIMMs are installed on a memory channel, if all other requirements for 1333 MHz operation are met. This provides a performance increase for most workloads. By default, the system will operate at a maximum 1066 MHz when two DIMMs are installed on any memory channel. HP has validated this functionality with all HP DIMMs. RBSU menu (HP ProLiant G7 servers or server blades) 91