HP ProLiant xw2x220c Administrator's Guide for Microsoft Windows on HP ProLian - Page 17
Admin Mode
View all HP ProLiant xw2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2-2 Admin Mode When Remote Console Mode is set to Admin Mode, the ATI video controller first generates the boot console during Power-on Self Test (POST), and then generates the Windows desktop (see Table 2-1 and Figure 2-3). In this mode, the NVIDIA graphics adapter is not visible to Windows, and is not used. Table 2-1 Use of the video controllers in Admin Mode ATI video controller NVIDIA graphics adapter Usage during POST Boot console Not used Usage after booting Windows desktop Invisible to Windows Figure 2-3 Admin Mode NVIDIA Quadro FX graphics adapter NVIDIA graphics adapter is not visible to Windows Windows desktop Boot console video USB x 2 serial Local I/O Connector Admin Mode ATI RN50 video controller (1280 x 1024) Dual Broadcom 5708 Ethernet controllers iLO 2 management processor NIC 1 NIC 2 iLO 2 Windows desktop First the boot console and then the Windows desktop are generated by the ATI video controller Boot console In Admin Mode, the boot console and the Windows desktop generated by the ATI video controller can be viewed in two ways: • Using a monitor connected to the Local I/O Connector video signal • Using the iLO 2 Remote Console by pointing your browser to the iLO 2 IP address Blade workstation video subsystem 17