HP Q7840A User Manual - Page 60
Print Quality menu
View all HP Q7840A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Print Quality menu NOTE Values shown with "(default)" are the factory-default values. Some menu items have no default. Table 2-15 Print Quality menu Menu item Set Registration Fuser Modes Optimize Resolution REt Sub-menu item Source Test Page Adjust Tray Restore Modes High Transfer More Separation 1 More Separation 2 Line Detail Fuser Temp Restore Optimize Values Description All trays Tray : (choose a tray) Use Set Registration to shift the margin alignment to center the image on the page from top to bottom and from left to right. You can also align the image on the front with the image printed on the back. Select the source input tray for printing the Set Registration page. Print (button) Print a test page for setting the registration. Follow the instructions that are printed on the page to adjust each tray. Shift from -20 to 20 along the X or Y axes. 0 is the default. Perform the alignment procedure for each tray. When it creates an image, the device scans across the page from side to side as the sheet feeds from top to bottom into the device. Configure the fuser mode associated with each media type. Restore (button) Restore the fuser modes to the default settings. Normal (default) Increased Off (default) Optimize print engine parameters to get the best possible print quality for all jobs in addition to specifying media type. On Off (default) On Off (default) On Normal Reduced Restore (button) 300 Reset all the Optimize parameters to the factory default settings. Use this feature to select the print resolution. 600 FastRes 1200 (default) ProRes 1200 Off Light Enable Resolution Enhancement technology (REt), which produces print output with smooth angles, 48 Chapter 2 Control panel ENWW