HP Server rp4440 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 24
Processors, Memory, Cooling, Power Supply Unit, Front Display Panel, DVD, and Diagnostic Panel
View all HP Server rp4440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
• Three DB-9 ports (console, UPS, and modem) • Optional dual channel U320 RAID controller, two 68-pin external connectors (replaces SCSI interface) Processors The following is supported on the HP 9000 rp4410 and rp4440 servers: • 800 MHz/1.5 GB cache or 1 GHz/1.5 GB cache per CPU • Both processors are available with 32 MB or 64 MB L2 cache per dual processor module • HP 9000 rp4410 server can have one processor or both processors of a single dual processor module enabled, or two processors enabled in each of two dual processor modules • HP 9000 rp4440 server can be 1P/2C, 2P/2C, 3P/2C, or 4P/2C Memory The following is supported on the HP 9000 rp4410 and rp4440 servers: • 16 DIMM slots on standard memory extender board • 32 DIMM slots on optional memory extender board • Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board) • Supports up to 32 Double Data Rate (DDR) registered ECC memory, in PC2100 DIMMs • Supported DDR DIMM sizes: - 128 MB, 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB - Standard 184 pins 2.5V DDR266, CL2, registered, ECC • 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth • DIMMs loaded by quads enable interleaved mode and chip spare • Requires that DIMMs within each group of four (quad) be identical Cooling Six cooling fans with N+1 redundancy. Power Supply Unit The following is supported on the HP 9000 rp4410 and rp4440 servers: • One 1200 W hot-swappable power supply • Optional second 1200 W hot-swappable power supply for N+1 redundancy Front Display Panel, DVD, and Diagnostic Panel The following is supported on the HP 9000 rp4410 and rp4440 servers: • Front panel that provides the controls and indicators commonly used for operation • DVD+RW drive (with CD-write capability); IDE interface; 48x speed • Optional slimline DVD drive • Power button and LED indicators for system status • LED-based diagnostic panel Mass Storage The following is supported on the HP 9000 rp4410 and rp4440 servers: • Up to two SCSI hot-pluggable hard disk drives • Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with two 68-pin connectors. The SCSI backplane is configured as either one or two channels 24 Overview