HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual - Supporting F - Page 233

fcrLsanMatrix 2 fcrLsanMatrix Creates, edits and displays LSAN fabric matrix information, which binds the LSAN Zone and device database information, per specified edge fabric ID. Synopsis fcrlsanmatrix [--add FabricID1 |FabricID2] [--remove FabricID1 |FabricID2] [--apply] [--cancel] [--display] [--fabricview] [--verify] [--quickmode] [--help] Description Use this command to specify the pairs of edge fabrics IDs that have two-way communication. Every pair implies two-way communications. The pairs of edge fabrics will have access only to the edge fabrics associated to them are specified using this command. The edge fabrics tha the user did not specify will have access to the remaining edge fabrics. Using this information, the FCR switch will maintain the remote LSAN Zone and the device state database only if it is associated to its local edge fabrics. For example, if edge fabrics FIDs 1, 2, 3, 4, 5 are online, the default is that every edge fabric have two-way communication. In the case where, 1 and 2 are specified to have access using the CLI: • 1 can access only 2. • 2 can access only 1. • 3, 4, 5 can access each other, but cannot access 1 or 2. The FIDs entered are not required to be online when setting up the LSAN fabric matrix. The LSAN fabric matrix information is saved per switch and not distributed to other FCR switches automatically. The best practice is to enter the same information for all the FCR switches in the backbone that supports this command. Using the command options, the user can do the following: Update the cached information (non-persistent location) by editing pairs of FIDs. Update the cached information by removing pairs of FIDs. Apply the changes to the persistent memory. Display the information saved in the cache. Clear the information from the cache and put it back to the saved value. Display the information that is saved in the persistent memory (CLI command with no option). Display the static and default/dynamic binding of the backbone to show which edge fabrics have two-way communication. Verify if the information in the cache is valid and will not disrupt existing import/export devices. Run a quickmode to derive the LSAN Zone matrix from the current import/ export database. Operands If no operands are specified, this command displays the persistent LSAN Zone matrix information. This command has the following operands: --add FID | FDI2 Adds the pair of edge fabrics that have two-way communication. If you specify --add without FIDs, it returns the cache to default mode. --remove FID | FDI2 Removes the entry of the pair of FIDS. If no longer specified, the edge fabric assumes the default behavior. Fabric OS Command Reference Manual 201 53-1000436-01