HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual - Supporting F - Page 234

2 fcrLsanMatrix --apply --cancel --fabricview --verify --quickmode Applies the information from the cache to the persistent memory only if there is no affect to the existing import/export devices. Otherwise, an error message is displayed. Cancels the data that was not applied; revert to the persistent information. Views all the static and default/dynamic fabric binding in the backbone. Verifies if the LSAN Zone information in the cache, which is entered by the user, will succeed when the user applies the data. The data is okay if the apply operation does not cause disruption to the traffic. Derives the LSAN Zone matrix from the import/export setup. Examples The backbone has the following online edge fabrics (FIDs): 1, 2, 4, 5, 7, 8, 10 (currently, 14, 19 are not available). To add the LSAN Zone Matrix data: switch:admin > fcrlsanmatrix --add 4 5 switch:admin >fcrlsanmatrix --add 4 7 switch:admin > fcrlsanmatrix --add 10 14 switch:admin > fcrlsanmatrix --add 10 19 To remove an entry: switch:admin > fcrlsanmatrix --remove 10 14 To display the information from the cache: switch:admin > fcrlsanmatrix --display Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 To apply the changes persistently: switch:admin > fcrlsanmatrix --apply To view the persistent changes: switch:admin > fcrlsanmatrix LSAN MATRIX is activated Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 To view the LSAN Zone static and default/dynamic binding in the backbone: For example, in the backbone where online fabrics are: 1, 2, 4, 5, 7, 8, 10 switch:admin > fcrlsanmatrix --fabricview LSAN MATRIX is activated 202 Fabric OS Command Reference Manual 53-1000436-01