HP StorageWorks 2/32 Brocade Fabric Manager Administrator's Guide (53-10000196 - Page 205
iSCSI Targets, Virtual Initiators
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Viewing iSCSI Information 13 iSCSI Targets The iSCSI Targets tab, shown in Figure 13-6, lists all iSCSI targets (virtual targets) in the SAN, fabric, or switch. You can filter the list based on iSCSI target name (IQN) and FC target name. This tab is disabled in the switch context because virtual targets are fabric-wide entities. Figure 13-6 iSCSI Tab, iSCSI Targets View If an iSCSI target is created from LUNs of multiple FC devices, there are multiple entries for that iSCSI target corresponding to each FC device. If an iSCSI target has multiple LUN configurations from a single FC device, there is only one entry for that iSCSI target. The state of the iSCSI target is offline if any of the FC devices that are part of the iSCSI target are offline. To edit an iSCSI target, right-click the target in the table and click Configure iSCSI Targets in the context menu. This launches the Web Tools iSCSI Target Gateway Admin module, from which you can view and configure iSCSI targets (see "Setting Up iSCSI Target Gateway Services" on page 13-7). Virtual Initiators The Virtual Initiators tab, shown in Figure 13-7, lists the virtual initiators available in the SAN, fabric, or switch. You can filter the list based on virtual initiator name and switch name. Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP 13-5