HP StorageWorks 2/32 Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 283
To con FMS mode parameters, Table 18-1, Parameter, Description
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
18 Table 18-1 FMS Mode Parameter Descriptions (Continued) Parameter Description User Alert Mode Controls director console behavior for alerts. Enabling this mode prompts the director consoles to display a warning whenever you attempt an action that will change switch parameters. When you disable this mode, no warning is displayed. In this case, in which Web Tools is the director console, warning messages are displayed by Web Tools regardless of the setting of the parameter, since Web Tools always displays warning messages when you apply a change to a switch that changes parameters. This parameter is always read-only in Web Tools. Each time that the switch is powered on, the parameter is reset to disabled. Director Clock Controls behavior for attempts to set the switch timestamp clock through the Alert Mode director console. When it is enabled, the director console (Web Tools, in this case) displays warning indications when the switch timestamp is changed by a user application. When it is disabled, you can activate a function to automatically set the timestamp clock. There is no indication for timestamp clock setting. This parameter is set as disabled by the hardware after system installation, and can be reset by Web Tools. Host Control Prohibited Determines whether host programming allows modifying port connectivity. Enabling this mode prohibits host programming control of port connectivity; otherwise, host programming can manage port connectivity. This parameter is set as disabled by the hardware after system installation. and can be reset by Web Tools. To configure FMS mode parameters 1. Click a FICON-enabled switch from the Fabric Tree. 2. Launch the Switch Admin module as described on page 3-3. 3. Click the FICON CUP tab. The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in front (see Figure 18-1 on page 18-3). All attributes on this tab are read-only until FMS mode is enabled. 4. To enable or disable an FMS mode parameter, click the checkbox next to the parameter. A marked checkbox means that the parameter is enabled. You cannot configure the User Alert Mode parameter in Web Tools, as it is read-only. Web Tools Administrator's Guide Publication Number: 53-0000194-01 18-5