HP StorageWorks 4/16 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 331
ipAddrShow, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Note: Enter commands in lowercase only; mixed case is for readability. ipAddrShow 2 ipAddrShow Displays the IP address information for a switch or control processor (CP). Synopsis ipaddrshow [-cp cp_number] | [-sw sw_number] Description Use this command to display the IP addresses configured in the system. The -cp option displays the CP IP address and the -sw option displays the switch IP addresses. For switches, the command displays the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask. For CPs, the command displays the Ethernet IP address, Ethernet subnetmask, host name, and gateway IP address. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: -cp cp_number For dual-CP systems, this specifies the CP card number to display (0 or 1). -sw sw_number For dual-domain systems, this specifies the switch number to display (0 or 1). If no operands are specified, the command displays all the IP addresses configured in the system. For nonchassis-based switches, this command ignores all operands. To display the IP address for logical switch 0: switch:admin> ipaddrshow -sw 0 Ethernet IP Address: 192.168.166.147 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: 0.0.0.0 Fibre Channel Subnetmask: 0.0.0.0 See Also ipAddrSet Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-297