HP StorageWorks 4/16 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 715
switchStatusPolicySet, Synopsis, Description, Operands, Table 2-17, Contributor, DOWN Default
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 715 highlights
Note: Enter commands in lowercase only; mixed case is for readability. switchStatusPolicySet 2 switchStatusPolicySet Sets the policy parameters that determine overall switch status. Synopsis switchstatuspolicyset Description Use this command to set policy parameters for calculating the overall status of the switch enclosure. The policy parameter values determine how many failed or faulty units of each contributor are allowed before triggering a status change in the switch from HEALTHY to MARGINAL or DOWN. The status of the switch can be found by issuing the switchStatusShow command. The existence of policies such as Fans, PowerSupplies, WWN, CP, and Blade might differ from platform to platform. The command displays the current parameters in a three-column table format, shown in the table. The command then prompts the user to change the values for each policy parameter. The default values for the policy parameters are shown here. Table 2-17 Default Contributor, Values, and Status Contributor DOWN Default MARGINAL Default PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 Any single contributor can force the overall status of the switch to MARGINAL or DOWN. For example, assuming that the switch contributor values are set to the default values, if there is one faulty port in a switch, then this contributor would set the overall switch status to MARGINAL. If two ports were faulty, then this contributor would set the overall switch status to DOWN. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-681