HP StorageWorks 4/16 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 322
Disables the iSNSC service on the switch.
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
2 fosConfig --disable feature fcr . iSCSI iSNSC vf --show Disables a feature on the switch. Valid values for feature are: Disables the FC Routing service on the switch. All enabled EX_Ports and VEX_Ports on the switch must be offline for this command to succeed. To use this command to disable the FC Routing service only instead of disabling the switch, issue this command, then change the BB fabric ID using fcrConfigure. When disabling the FCR service, you may encounter the following system messages: "Please disable all EX/VEX_Ports first before running this command." This means that there were EX_Ports or VEX_Ports online when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Disables the iSCSI service on the switch. Disables the iSNSC service on the switch. Disables Virtual Fabrics on the switch. This command prompts for confirmation, because the chassis reboots after this command is executed. Displays the current operating status of features on the switch. Examples To display the operating status of the services: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS Client service: Virtual Fabric: enabled enabled disabled enabled To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable the iSCSI service: switch:admin> fosconfig --enable iscsi iSCSI service is enabled To disable the iSCSI service: switch:admin> fosconfig --disable iscsi iSCSI service is disabled 294 Fabric OS Command Reference 53-1001186-01