HP StorageWorks 4/16 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 872
zoneRemove, A World Wide Name
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 872 highlights
2 zoneRemove zoneRemove Synopsis Removes a member from a zone. zoneremove "zonename", "zoneMemberList" Description Use this command to remove one or more members from an existing zone. If all members are removed, the zone is deleted. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zonename" Specify the name of the zone from which to remove a member. Double quotation marks are optional. "zoneMemberList" Specify a member or a list of members to be removed from the specified zone. The list must be enclosed in double quotation marks. Members must be separated by semicolons. A member can be one or more of the following: • A switch domain and port area or index pair: for example, "2,20". Use switchShow for a list of valid port area or index numbers. • A World Wide Name • A zone alias name Examples To remove "array2" from "Blue_zone": switch:admin> zoneremove "Blue_zone", "array2" See Also zoneAdd, zoneCreate, zoneDelete, zoneShow 844 Fabric OS Command Reference 53-1001186-01