HP StorageWorks 4/16 HP StorageWorks Fabric OS 5.3.1a release notes (AA-RWEYJ- - Page 29

Fabric OS 5.3.1a fixes Table 9 lists defects closed in this Fabric OS 5.3.1a firmware release. Table 9 Fabric OS 5.3.1a closed defects Closed defect summary Solution F_Port link initialization failure caused by the switch not responding to NOS with OLS (continues to send idles). Fixed in Fabric OS 5.3.1a When downgrading from 6.0.0x to Fabric OS 5.3.0c, then 5.2.1b, then 5.0.5a, the switch can get into an endless reboot causing file system errors to be reported. Fixed in Fabric OS 5.3.1a If your switch is not upgraded to 5.3.1a, the workaround is to issue firmwaredownload with the -sf option: firmwaredownload -sf nl Use default answers so that firmwaredownload does not reboot after download, then perform the following steps: nl mount -oremount,ro /mntumount /mnt nl hareboot FR4-18i blade is faulted during operation with internal FCIP-5031 raslog Fixed in Fabric OS 5.3.1a and external EM-1034 raslog. The zoneadmin feature in Web Tools does not display the new ports after adding a new blade. Fixed in Fabric OS 5.3.1a Only 1 FL port FLOGI is successful and second FL port FLOGI is disabled in a time interval.t. Even though FL port will be re-enabled after the short time interval, 3rd party failover application may fail. Fixed in Fabric OS 5.3.1a When the proxy device projected to the backbone had a translate domain of greater than 0x20, router is not translating the ACC for a REC properly. Customer observes traffic interrupted and tape device fail. Fixed in Fabric OS 5.3.1a When there is an application request GPPN on a device connected to multiple switches, customer might see continuous rtwr message on a pair of switches and directed at each other from msd: nl [RTWR-1003],,, INFO, , msd0: RTWR retry 48 to domain 152, iu_data 1000000 RTWR Maxretries exhausted: 0x30, 0x8, 0x65, 0x0, 0x41d on multipath switches. nl Potential for switch panic when memory is exhausted. Fixed in Fabric OS 5.3.1a IMPORTANT: All Fabric OS 5.2.3 closed defects as listed in the HP StorageWorks Fabric OS 5.2.3 release notes have been rolled into this latest Fabric OS 5.3.1a firmware. However, please note that these same 5.2.3 closed defects have not been resolved in any 5.3.x release prior to 5.3.1 (specifically 5.3.0, 5.3.0a, 5.3.0b, 5.3.0c or 5.3.0d). HP StorageWorks Fabric OS 5.3.1a release notes 29