HP StorageWorks 4/32 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 285
haShow, Synopsis, Description, Healthy, Failed, Unknown, haFailover, haSyncStop, Operands, Examples
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
haShow 2 haShow Displays control processor (CP) status. Synopsis hashow Description Use this command to display control processor status. The display includes: • Local CP state (slot number and CP ID), warm or cold, recovering or recovered • Remote CP state (slot number and CP ID) • High Availability (enabled or disabled) • Heartbeat (up or down) • Health of standby CP defined as follows: Healthy The standby CP is running and the background health diagnostic has not detected any errors. Failed The standby CP is running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate repair action. Failover is disabled until the standby CP is repaired. Information about the failing device in the standby CP is displayed. Unknown The standby CP health state is unknown because the standby CP does not exist, heartbeat is down, or Health Monitor detects a configuration file error. • HA synchronization status: "HA State synchronized" The system is currently fully synchronized. If a failover became necessary, it would be nondisruptive HA State "not in sync" The system is unable to synchronize the two CPs. This may be caused by one or more of the following conditions: • A haFailover was issued. In this case the "HA State 'not in sync'" state is transitory. • The standby CP is faulty. • A haSyncStop command was issued. • A system error occurred. If a failover becomes necessary while the CPs are not in sync, the standby CP reboots, and the failover is disruptive. Note This command may not be supported on non-bladed systems. Operands none Examples To display CP status, first on a healthy standby CP and then on a faulty standby CP: switch:admin> hashow Local CP (Slot 6, CP1): Active, Cold Recovered Remote CP (Slot 5, CP0): Non-Redundant Fabric OS Command Reference 259 53-1000599-02