HP StorageWorks 4/32 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 90
cfgSave, validates the effective configuration by performing the same tests
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
2 cfgSave cfgSave Saves zone configuration to nonvolatile memory. Synopsis cfgsave Description Use this command to save the current zone configuration. This command writes the defined configuration and the name of the effective configuration to nonvolatile memory in all switches in the fabric. The saved configuration is automatically reloaded at power on, and, if a configuration was in effect at the time it was saved, the same configuration is reinstalled with an automatic cfgEnable command. Because the saved configuration is reloaded at power on, only valid configurations are saved. cfgSave validates the effective configuration by performing the same tests as cfgEnable. If the tests fail, an error displays and the configuration is not saved. This command ends and commits the current transaction. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To save a zone configuration: switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y Updating flash ... See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgShow, cfgTransAbort, cfgTransShow 64 Fabric OS Command Reference 53-1000599-02