HP StorageWorks 4/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 497
portCfgTrunkPort, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 497 highlights
Note: Enter commands in lowercase only; mixed case is for readability. portCfgTrunkPort 2 portCfgTrunkPort Configures a port to enable or disable trunking. Synopsis portcfgtrunkport [slotnumber/]portnumber[,] mode Description Use this command to enable or disable a port for trunking. You can disable or enable trunking using the portCfgTrunkPort or switchCfgTrunk commands. When the command is executed to update the trunking configuration, the ports for which the configuration applies are disabled and reenabled with the new trunk configuration. As a result, the traffic through these ports might be disrupted for a period of time. Note This command requires a Brocade ISL Trunking license. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). portnumber Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. mode Specify 1 to enable this port for trunking. Specify 0 to disable the port from being trunked. This operand is required. To enable a port for trunking: switch:admin> portcfgtrunkport 1/3, 1 See Also portCfgShow, portShow, switchCfgTrunk, switchShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-463