HP StorageWorks 4/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 151

14 FABS-1007 FABS-1007 Message , [FABS-1007], ,, WARNING, , : Media state is invalid - status= Probable Cause Indicates that the Fabric OS has detected an invalid value in an object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1008 Message , [FABS-1008], ,, WARNING, , : Media oid mapping failed Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING FABS-1009 Message , [FABS-1009], ,, WARNING, , : type is not media Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING Fabric OS Message Reference 103 53-1000437-01