HP StorageWorks 8/80 Brocade Fabric OS MIB Reference Guide v6.2.0 (53-1001156- - Page 16

• Description of any troubleshooting steps already performed and the results • Serial console and Telnet session logs • Syslog message logs 2. Switch Serial Number The switch serial number and corresponding bar code are provided on the serial number label, as shown here: *FT00X0054E9* FT00X0054E9 The serial number label is located as follows: • Brocade 200E-On the nonport side of the chassis • Brocade 300, 4100, 4900, 5100, 5300, and 7500-On the switch ID pull-out tab located inside the chassis on the port side on the left • Brocade 5000-On the switch ID pull-out tab located on the bottom of the port side of the switch • Brocade 7600-On the bottom of the chassis • Brocade 48000, Brocade DCX, Brocade DCX-4S-Inside the chassis next to the power supply bays. 3. World Wide Name (WWN) • Use the wwn command to display the switch WWN. If you cannot use the wwn command because the switch is inoperable, you can get the WWN from the same place as the serial number. Document feedback Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number and as much detail as possible about your comment, including the topic heading and page number and your suggestions for improvement. xvi Fabric OS MIB Reference 53-1001156-01