HP StorageWorks 8/80 Brocade Fabric OS MIB Reference Guide v6.2.0 (53-1001156- - Page 559

swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 5 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. This OID is writeable only in Fabric OS v2.6.x and v3.x. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always "swCurrent(1)".This is not supported in v6.0.0 and higher versions. Values Possible values are: • swCurrent (1) The flash contains the current firmware image or configuration file. • swCfUpload (3) The switch configuration file is to be uploaded to the host specified. • swCfDownload (4) The switch configuration file is to be downloaded from the host specified. • swFwCorrupted (5) The firmware in the flash is corrupted. This value is for informational purposes only; however, setting swFlashDLAdmStatus to this value is not allowed. For more information about the firmwareDownload, configDownload and configUpload commands, refer to the Fabric OS Command Reference. Fabric OS MIB Reference 543 53-1001156-01