HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.0g release notes (5697-7861 - Page 17
Fabric OS 6.1.0 - san switch memory
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Fabric OS 6.1.0 fixes Table 6 lists defects closed in the Fabric OS 6.1.0 firmware release. Table 6 Fabric OS 6.1.0 closed defects Closed defect summary Solution Autonegotiation with specific HBAs does not bring the ports to the correct maximum speed. Fixed in Fabric OS 6.1.0 An FC Analyzer trace shows an FCR port is receiving periodic RRQ and ABTS frames. Fixed in Fabric OS 6.1.0 HAReboot on MP Router 400 (with the edge fabric is an EOS fabric) results in port bouncing due to no BB credits. Fixed in Fabric OS 6.1.0 After switchdisable and switchenable all FCR switches, from the edge fabric translate domain are missing. Fixed in Fabric OS 6.1.0 Unable to access CUP Port on local or cascaded switch through DC Director. Fixed in Fabric OS 6.1.0 In some rare scenarios, application hangs are noticed on the Server when FCFW related actions are taken on the fabric. Fixed in Fabric OS 6.1.0 Management server daemon (msd) panic on switch during fabric bring up. Fixed in Fabric OS 6.1.0 In a FICON configuration, VE port persists in offline state after link down when GbE link is routed through a network switch Fixed in Fabric OS 6.1.0 Unable to establish connectivity between HBA and Storage. Fixed in Fabric OS 6.1.0 CP failover on a 4/256 SAN Director. Fixed in Fabric OS 6.1.0 FCFW devices: I/O fails on the backbone fabric. Fixed in Fabric OS 6.1.0 LD ISL sometimes comes up in VC_RDY mode, not QoS mode. Fixed in Fabric OS 6.1.0 During constant power-cycle test, one of the switches panicked due to a memory allocation failure. Fixed in Fabric OS 6.1.0 Request change to parameters passed to Java running on the PC. Fixed in Fabric OS 6.1.0 When ports are segmented, two B-model fabrics are shown connected to each other even though safe zoning state differs. Fixed in Fabric OS 6.1.0 Subnetted FCIP port sends MAC level broadcast instead of the routers MAC. Fixed in Fabric OS 6.1.0 In some cases, frame loss is observed during normal FICON I/O. Fixed in Fabric OS 6.1.0 TopTalkers counters are inaccurate when enabled on more than one Fx_Port at a time. Fixed in Fabric OS 6.1.0 Top Talker F_Port monitor is broken, only one F_Port can be monitored at one switch. Same test case passed on Beta frame. Fixed in Fabric OS 6.1.0 FICON Emulation Error running to STK/SUN tape drives. Fixed in Fabric OS 6.1.0 An "ipfilter --transabort" command running in one Telnet session can be aborted from another Telnet session. Fixed in Fabric OS 6.1.0 Cannot set "Portlog events enable" accurately. Fixed in Fabric OS 6.1.0 The DC Director may ASSERT in a specific test scenario while running a particular FICON test program (SAK IRNDUP). Fixed in Fabric OS 6.1.0 Brocade 4-Gb SAN Switch for HP c-Class BladeSystem power-on-self-test (POST) failure on chassis power on. Fixed in Fabric OS 6.1.0 HP StorageWorks Fabric OS 6.1.0g release notes 17