HP StorageWorks MSA 2/8 IMPORTANT - HP StorageWorks Modular SAN Array 1000 SAN
HP StorageWorks MSA 2/8 - SAN Switch Manual
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA 2/8 manual content summary:
- HP StorageWorks MSA 2/8 | IMPORTANT - HP StorageWorks Modular SAN Array 1000 SAN - Page 1
documentation. ■ Before installing the HP StorageWorks Modular SAN Array 1000 SAN Switch 2/8, make sure that the HP StorageWorks Modular SAN Array 1000 has firmware version 2.38 or newer. ■ Because of the built in power-on self-test (POST) diagnostics of the MSA SAN Switch 2/8, the switch is not - HP StorageWorks MSA 2/8 | IMPORTANT - HP StorageWorks Modular SAN Array 1000 SAN - Page 2
Chapter 3 of the HP StorageWorks MSA SAN Switch 2/8 Installation Guide for supported configuration methods. ■ The MSAFlash firmware update utility for the MSA1000 does not discover the MSA SAN Switch 2/8. Refer to Chapter 5 of the HP StorageWorks MSA SAN Switch 2/8 Installation Guide for the proper
© 2003 Hewlett-Packard Company
326322-001
Printed in the U.S.A.
February 2003
Microsoft® is a US registered trademark of Microsoft Corporation.
The information in this document is subject to change without notice.
important
326322- 001
hp
StorageWorks
Modular SAN Array 1000 SAN
Switch 2/8
This card provides important information not covered in other documentation.
■
Before installing the HP StorageWorks Modular SAN Array 1000 SAN
Switch 2/8, make sure that the HP StorageWorks Modular SAN Array 1000
has firmware version 2.38 or newer.
■
Because of the built in power-on self-test (POST) diagnostics of the MSA
SAN Switch 2/8,
the switch is not completely initialized when the MSA1000
LCD panel displays:
01 Compaq MSA1000
Startup Complete
When the MSA SAN Switch 2/8 is fully initialized, the MSA1000 LCD panel
displays:
SanSwitch 2/8 IP adr
<switch IP address>
The MSA SAN Switch 2/8 is fully initialized and available to connected hosts
as soon as this message is displayed on the MSA1000 LCD panel.
Please allow additional time for the switch to compete the POST diagnostics
before attempting any data transfer from the host to the MSA1000. For more
information about POST diagnostics, please refer to Chapter 4 of the
HP
StorageWorks MSA SAN Switch 2/8 Installation Guide
.