HP StorageWorks MSA 2/8 IMPORTANT - HP StorageWorks Modular SAN Array 1000 SAN - Page 1
HP StorageWorks MSA 2/8 - SAN Switch Manual
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
important hp StorageWorks Modular SAN Array 1000 SAN Switch 2/8 This card provides important information not covered in other documentation. ■ Before installing the HP StorageWorks Modular SAN Array 1000 SAN Switch 2/8, make sure that the HP StorageWorks Modular SAN Array 1000 has firmware version 2.38 or newer. ■ Because of the built in power-on self-test (POST) diagnostics of the MSA SAN Switch 2/8, the switch is not completely initialized when the MSA1000 LCD panel displays: 01 Compaq MSA1000 Startup Complete When the MSA SAN Switch 2/8 is fully initialized, the MSA1000 LCD panel displays: SanSwitch 2/8 IP adr The MSA SAN Switch 2/8 is fully initialized and available to connected hosts as soon as this message is displayed on the MSA1000 LCD panel. Please allow additional time for the switch to compete the POST diagnostics before attempting any data transfer from the host to the MSA1000. For more information about POST diagnostics, please refer to Chapter 4 of the HP StorageWorks MSA SAN Switch 2/8 Installation Guide. © 2003 Hewlett-Packard Company Printed in the U.S.A. Microsoft® is a US registered trademark of Microsoft Corporation. The information in this document is subject to change without notice. 326322-001 February 2003 326322- 001