HP Surestore 6164 Fabric OS Reference Manual

HP Surestore 6164 - Switch Manual

Get HP Surestore 6164 - Switch PDF manuals and user guides View all HP Surestore 6164 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Surestore 6164 manual content summary:

  • HP Surestore 6164 | Fabric OS Reference Manual - Page 1
    reference manual version 2.4 Fabric OS www.hp.com
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 2
    other brands, product or service names are or may be trademarks or service marks of, and are used to identify products of services of their respective owners enhanced product usage. Note Denotes significant concepts or operating instructions. CAUTION Denotes a hazard that can cause hardware or
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 3
    CONTENTS Revision History 9 Preface 11 About This Guide 11 Related Publications 11 Getting Help 12 Getting Software Updates 12 1 Telnet Commands 13 agtcfgDefault 13 agtcfgSet 16 agtcfgShow 19 aliasShow 22 backSpace 23 bcastShow
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 4
    configure 40 Arbitrated Loop Settings 41 Switch Fabric Settings 42 System Services Settings 45 Virtual Channel Settings 46 crossPortTest 49 switchEnable switchDisable Mode 51 91 ifModeShow 92 ifShow 93 interfaceShow 95 iodReset 102 iodSet 103 4 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 5
    Contents iodShow 104 ipAddrSet 105 ipAddrShow 107 islTopoCheck 108 islTopoShow 110 licenseAdd 112 licenseHelp 113 licenseRemove 114 licenseShow 115 linkCost 116 login 117 logout 118 loopdiagClear 119 loopdiagDone 120 LSDbShow 121 mcastShow 125 msConfigure 127 msPlatShow 129
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 6
    switchBeacon 217 switchDisable 218 switchEnable 219 switchName 220 switchShow 221 switchStatusPolicySet 225 switchStatusPolicyShow 228 switchStatusShow 230 syslogdIpAdd 232 syslogdIpRemove 233 syslogdIpShow 234 6 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 7
    tempShow 235 timeOut 236 topologyShow 237 trackChangesSet 239 uptime 241 uRouteConfig 243 uRouteRemove 245 uRouteShow 246 version 248 2 Error Messages 249 System Error Message Formats 250 Displaying Error Messages Using Telnet 251 Resetting Bad Ports 252 POST Test Commands 252 POST
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 8
    8 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 9
    Revision History July 2001 First release. 9
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 10
    10 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 11
    PREFACE Fabric OS Reference Manual contains descriptions for the telnet commands used to administer and configure switches. About This Guide This guide provides the following information about Fabric OS: Chapter 1 Telnet Commands Chapter 2 Error Messages Chapter 3 Feature Telnet Commands
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 12
    Surestore FC Switch 6164 Quick Start Guide A7326-90901 Distributed Fabrics User's Guide, version 2.2 Available only on CD Fabric Watch User's Guide, version 2.2 Available only on CD MIB Reference Manual, version 2.3 Available only on CD QuickLoop User's Guide, version 2.3 Available only on CD
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 13
    to default values: • sysDescr - The default value is Fibre Channel Switch. • sysLocation - The default value is End User Premise. • sysContact - The default value is Field Support. 13
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 14
    3: private Community 4: public Community 5: common Community 6: FibreChannel Note For more information about these SNMP configuration parameters, see agtcfgset command. Operands None. 14 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 15
    Agent Configuration Customizable MIB-II system variables: sysDescr = Fibre Channel Switch. sysLocation = End User Premise sysContact = Field Support. swEventTrapLevel = 0 authTraps = 0 (OFF) SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) No trap recipient configured
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 16
    End User Premise. • sysContact - Specify the contact information for this switch. The default value is Field Support. • swEventTrapLevel - Specify the event trap level in conjunction with an event's severity level. When an community string is not known to the agent. 16 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 17
    • There are six communities, each with a respective trap recipient, supported by the agent. The first three communities are for read-write access (rw) and the last three are for read-only access (ro). Specify the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 18
    the whole line, sysDescr: [FC Switch] sysLocation: [End User Premise] sysContact: [Field Support] swEventTrapLevel: (0..5) [3] 4 authTrapsEnabled (true, t, false, f): [true] SNMP community and : [0.0.0.0] value = 1 = 0x1 switch:admin> See Also agtcfgDefault agtcfgShow 18 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 19
    agtcfgShow Display the SNMP agent configuration. Synopsis agtcfgShow Availability All users Description Use this command to display the configuration of the SNMP agent in the switch. The following information is displayed: • sysDescr - Displays the switch description. • sysLocation - Displays
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 20
    • There are six communities, each with a respective trap recipient, supported by the agent. The first three communities are for read-write access (rw) and the last three more information about these SNMP configuration parameters, see agtcfgset command. Operands None. 20 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 21
    Current SNMP Agent Configuration Customizable MIB-II system variables: sysDescr = FC Switch sysLocation = End User Premise sysContact = Field Support. swEventTrapLevel = 3 authTraps = 1 (ON) SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) Trap recipient: 192.168.1.51
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 22
    type; can only be 10 for multicast. qlfr Alias qualifier of group. Member list A list of member address IDs. Operands None. 22 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 23
    Example To display the entries in the local alias server, enter the following command: switch:admin> aliasShow The Local Alias Server has 1 entry Alias ID Creator Token [rb, type, grptype, qlfr] Member List fffb01 fffffd [40, 05, 10, 60000010 12000069] {021200 0208e2} See Also fabricShow switchShow
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 24
    broadcast group. Displays a map of all ports in broadcast tree. Displays a map of all E_Ports in broadcast tree. Reserved. Operands None. 24 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 25
    Example To display the broadcast routing information for all ports in the switch: switch:admin> bcastShow Group Member Ports Member ISL Ports Static ISL Ports 256 0x00012083 0x00002080 0x00000000 See Also mcastShow portRouteShow Telnet Commands 25
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 26
    if failures are detected: DIAG-CAMINIT DIAG-XMIT DIAG-CAMSID See Also centralMemoryTest cmemRetentionTest cmiTest crossPortTest portLoopbackTest portRegTest ramTest spinSilk sramRetentionTest 26 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 27
    centralMemoryTest Bit write/read test of the ASIC central memory. Synopsis centralMemoryTest [passCount, dataType, dataSeed] Availability admin Description Use this command to verify the address and data bus of the ASIC SRAMs that serve as the central memory. Note This command cannot be executed on
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 28
    Errors There are four possible error messages if failures are detected: DIAG-TIMEOUT DIAG-BADINT DIAG-CMERRTYPE DIAG-CMERRPTN See Also camTest cmemRetentionTest portLoopbackTest portRegTest ramTest spinSilk sramRetentionTest 28 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 29
    cmemRetentionTest Data retention test of the central memory SRAMs. Synopsis cmemRetentionTest [passCount] Availability admin Description Use this command to verify for data retention in the central memory SRAMs in the ASIC. Note This command cannot be executed on an operational switch. You must
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 30
    bit are not set. - If a bad checksum test, the CMI error bit and the CMI error interrupt status bit are set. 30 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 31
    4. Check that all ASICs (other than Y) do not have: - The capture flag set. - The CMI error bit set. - The CMI error interrupt status bit set. Operands This command has the following operand: passCount Specify the number of times to execute this test. The default value is 1. This operand is
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 32
    configuration parameters are cached by the system. To avoid unexpected switch behavior, reboot the system after executing this command. Operands None. 32 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 33
    changes. The download process uses either FTP or the RSHD protocol (TCP service 514). On Windows NT, the FTP server may have to be installed or 9x, two utilities are supplied, RSHD.EXE and CAT.EXE, together with instructions on how to install and run them. The FTP server or RSHD must
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 34
    optional. passwd Specify a password in quotation marks. If present, the command uses FTP to transfer the file. This operand is optional. 34 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 35
    Example To download switch configuration from the server citadel, username jdoe, and host file name config.txt: switch:admin> configDownload "citadel","jdoe","config.txt" Committing configuration...done. download complete Errors There are several possible reasons for a failure of this command: •
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 36
    entries that contain the text string. The filter does not apply to the Ethernet MAC address and NVRAM data display settings. 36 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 37
    Example To display system configuration settings: switch:admin> configShow Ethernet address: 0:60:69:0:60:10 Nvram data: fei(0,0)host:/usr/switch/firmware u=user tn=switch Type to continue, Q to stop: diag.postDisable: 0 fabric.domain: 1 fabric.ops.BBCredit: 16 fabric.ops.E_D_TOV:
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 38
    upload process uses either FTP or the RSHD protocol (TPC service 514). Both of these services are widely available on UNIX hosts, but less so on two utilities supplied for RSHD.EXE and CAT.EXE currently do not support uploads, only downloads. Therefore, in a Windows environment, FTP must be Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 39
    file Specify a file name in quotation marks; for example, "config.txt". Absolute path names may be specified using forward slash (/). Relative path names create the file in the user's home directory on UNIX hosts, and in the directory where the FTP server is running on Windows hosts. This operand
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 40
    to change the system configuration settings: • arbitrated loop settings • switch fabric settings • system services settings • virtual channel settings Note Do not run this command on an operational switch. First on many computers, but can be different on your system. 40 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 41
    End-of-file (control-D) When entered at a prompt with no preceding input, terminates the command and saves changes made.This keystroke is common on many computers, but can be different on your system. The tables in the next section define those settings that may be changed. Arbitrated Loop
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 42
    Priority Boolean 0 Range Varies 1 to 16 E_D_TOV * 2 to 120000 1000 to R_A_TOV / 2 256 to 2112 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 42 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 43
    Domain BB Credit R_A_TOV E_D_TOV Data Field Size The domain number uniquely identifies the switch in a fabric. This value is automatically assigned by the fabric. The range of allowed values varies depending on the switch model and other system settings (see VC Encoded Address Mode). The buffer-to-
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 44
    explicitly rely on a specific frame address format. Per-frame Route Priority In addition to the eight virtual channels used in frame routing priority, support is also available for per-frame based prioritization when this value is set. When set, the virtual channel ID is used in conjunction with
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 45
    Off This section provides a description of the system service setting fields: rstatd Dynamically enables or disables a server login location (if applicable). The retrieval of this information is supported by a number of operating systems support RPC. On most UNIX-based systems (HP-UX, Irix,
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 46
    using a Virtual Channel normally reserved for fabric-internal traffic. This setting is configurable only when VC Encoded Address Mode is set. 46 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 47
    VC Class 2 VC Class 3 VC Multicast VC Priority Operands None. Specifies the Virtual Channel used for class 2 frame traffic. This setting is configurable only when VC Encoded Address Mode is set. Specifies the Virtual Channel used for class 3 frame traffic. This setting is configurable only when VC
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 48
    VC Priority 6: (2..3) [3] VC Priority 7: (2..3) [3] Arbitrated Loop parameters (yes, y, no, n): [no] yes Send FAN frames?: (0..1) [1] Always send RSCN?: (0..1) [0] System services (yes, y, no, n): [no] yes rstatd (on, off): [off] on rusersd (on, off): [off] on Committing configuration...done. See
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 49
    crossPortTest Functional test of port M->N path. Synopsis crossPortTest [passCount, singlePortAlso] Availability admin Description Use this command to verify the functional operation of the switch. This command verifies operation by sending frames from the port M transmitter and looping the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 50
    three following modes can be activated; the test produces different results for each mode: • switchEnable/switchDisable mode • singlePortAlso mode • GBIC mode 50 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 51
    switchEnable switchDisable Mode This mode can be run in one of two states, ONLINE or OFFLINE. In the ONLINE state, the switch is enabled prior to executing the test. In this state, only ports that are cable loopbacked to ports from the same switch are tested. Ports connected outside of the switch
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 52
    is saved in flash memory and remains active (even after reboots or power cycles) until it is disabled: switch:admin> setGbicMode 0 52 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 53
    For example, disable the switch, set the GBIC mode to 1, and execute crossPortTest with singlePortAlsoactivated and the crossPortTest to limit testing to: only ports containing GBICs that _all_ GBIC ports that are cable loopbacked ports connected to themselves (single port connections) Because this
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 54
    -PORTDIED DIAG-XMIT DIAG-TIMEOUT DIAG-ERRSTAT DIAG-STATS DIAG-PORTWRONG DIAG-DATA See Also camTest portLoopbackTest portRegTest ramTest spinSilk sramRetentionTest 54 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 55
    Year values greater than 69 are interpreted as 1970-1999, year values less than 70 are interpreted as 2000-2069. The date function does not support daylight saving time or time zones. All switches maintain current date and time in non-volatile memory. Date and time are used for logging events
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 56
    Example To display the current date and time, and then change it to Feb 27 12:30:00 2001: switch:admin> date Fri Jan 29 17:01:48 1999 switch:admin> date "0227123001" Thu Feb 27 12:30:00 2001 See Also errLogShow portLogShow uptime 56 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 57
    diagClearError Clear the diag software flag to allow for retest. Synopsis diagClearError [port] Availability admin Description Use this command to clear the diag software flag that indicates whether a port is BAD or OK. The current flag settings are displayed by using the diagShow command. This
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 58
    descriptions. Note The cold boot (power reset) runs the long ramTest, while the warm boot (software reset) runs the short ramTest. 58 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 59
    Operands None. Example To disable the POST during future power ons: switch:admin> diagDisablePost Committing configuration...done. On next reboot, POST will be skipped. See Also diagEnablePost Telnet Commands 59
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 60
    To enable the POST during future power ons: switch:admin> diagEnablePost Committing configuration...done. On next reboot, POST will be executed. 60 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 61
    Synopsis diagHelp Availability All users Description Use this command to display a list of the diagnostic help commands for troubleshooting switch problems. Operands None. Example To display diagnostic help commands: switch:admin> diaghelp ramTest portRegTest centralMemoryTest cmiTest camTest
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 62
    be executed by using the s (Stats) option of the QCSL diag prompt, which is generated when a diagnostic test is keyboard interrupted. 62 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 63
    It can also be looped by specifying the nseconds operand. This operand enables you to specify a repeat interval for this command. If a repeat interval is specified, the command continues to execute until interrupted. For example, diagShow 4 executes diagShow every 4 seconds unless stopped by a
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 64
    . 0 LLI_errs 0 LLI_errs. 0 LLI_errs. 0 LLI_errs. 0 LLI_errs. 0 LLI_errs. 0 LLI_errs. See Also diagClearError 64 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 65
    dlsReset Turn off dynamic load sharing option. Synopsis dlsReset Availability admin Description Use this command to disable dynamic load sharing when a fabric change occurs. See dlsSet for a full description of load sharing. Use this command only if devices connected to the fabric cannot handle
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 66
    forwarded. This period of time is significantly shorter than when in-order delivery is on, and is usually less than 1 second. 66 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 67
    Operands None. Example To enable the dynamic load sharing option: switch:admin> dlsSet Committing configuration...done. switch:admin> dlsShow DLS is set See Also dlsReset dlsShow dlsShow Display the state of the Dynamic Load Sharing option. Synopsis dlsShow Availability All users Description
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 68
    1, Port 1 receive timeout. Error 01 -------0x103e9500 (tSwitch): Feb 5 16:42:39 Error SYS-BOOT, 3, Restart reason: Reboot See Also errShow uptime 68 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 69
    times, the repeat count is shown in parentheses. The maximum count is 999. An uppercase string showing the firmware module and error type. The switch manual contains a detailed explanation of error types. Telnet Commands 69
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 70
    -POST_SKIPPED DIAG-MEMORY DIAG-MEMSZ DIAG-MEMNULL DIAG-BUS_TIMEOUT DIAG-REGERR DIAG-REGERR_UNRST DIAG-BUS_TIMEOUT DIAG-REGERR DIAG-REGERR_UNRST DIAG-CMBISRTO 70 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 71
    Table 3. Diagnostic Error Codes (continued) Error Number Test Error Type 1021 centralMemoryTest DIAG-CMBISRF 1025 centralMemoryTest DIAG-LCMRS 1026 centralMemoryTest DIAG-LCMTO 1027 centralMemoryTest DIAG-LCMEM 1028 centralMemoryTest DIAG-LCMEMT 1029 centralMemoryTest DIAG-CMNOBUF
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 72
    -ERRSTAT (BADEOF) 3045 crossPortTest DIAG-ERRSTAT (ENCOUT) 3046 crossPortTest DIAG-ERRSTAT (BADORD) 3047 crossPortTest DIAG-ERRSTAT (DISCC3 304F crossPortTest DIAG-INIT 72 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 73
    Table 3. Diagnostic Error Codes (continued) Error Number Test Error Type 305F crossPortTest DIAG-PORTDIED 3060 crossPortTest DIAG-STATS (FTX) 3061 crossPortTest DIAG-STATS (FRX) 3062 crossPortTest DIAG-STATS (C3FRX) 306E crossPortTest DIAG-DATA 306F crossPortTest DIAG-TIMEOUT
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 74
    stop: Error 01 -------0x103e9500 (tSwitch): Feb 5 16:58:39 Error SYS-BOOT, 3, Restart reason: Reboot See Also errDump firmwareDownload reboot uptime 74 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 75
    fabricShow Displays fabric membership information. Synopsis fabricShow Availability All users Description Use this command to display information about switches and multicast alias groups in the fabric. Multicast alias groups are created on demand by request from N_Ports attached to the alias
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 76
    has 4 switches Group ID Token 0: fffb01 40:05:00:00:10:00:00:60:69:00:00:15 See Also switchShow 76 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 77
    fanShow Display fan status. Synopsis fanShow Availability All users Description Use this command to display the current status of the switch fans.The format of the display varies according to the switch model and number of fans. Some switch models show fan speed measured in RPM. The current fan
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 78
    switches reconfigure. Operands None. Example To reboot the switch, bypassing the POST: switch:admin> fastboot Rebooting... See Also diagDisablePost diagEnablePost reboot 78 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 79
    either FTP (File Transfer Protocol) or the RSHD protocol (TCP service 514). Both of these services are widely available on UNIX hosts, but less so on Windows supplied with the firmware file, RSHD.EXE and CAT.EXE, together with instructions on how to install and run them. The FTP server or RSHD must
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 80
    a firmware file: switch:admin> firmwareDownload "citadel","jdoe","/home/firmware/v2.2" 55696+6984+133172, csum 7eca writing flash 0 writing flash 1 download complete 80 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 81
    Errors There are many reasons why the download can fail: • The host name is not known to the switch. • The host IP address cannot be contacted. • The user does not have permission on the host. • The user runs a script that prints something at login. • The path to the firmware may be case sensitive.
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 82
    . lsrDelayTo: Link State Record delay time-out value, in milliseconds. lsrDelayCount: Counter of delayed Link State Records. ddb_sem: FSPF semaphore ID. 82 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 83
    Table 6. fspfShow display fields (continued) Field Description event_sch: FSPF scheduled events bit map. lsrRefreshCnt: Internal variable. Operands None. Example To display FSPF protocol information: switch:admin> fspfshow version domainID isl_ports minLSArrival minLSInterval LSoriginCount
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 84
    Specify the port number to be displayed. Valid values are 0-7 or 0-15 depending on the switch type. This operand is optional. 84 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 85
    Example To display GBIC summary information for an eight-port switch, followed by detailed information for a Finisar "smart" GBIC: switch:admin> gbicShow port 0: id Vendor: FINISAR CORP. Serial No: 103980 port 1: id Vendor: HEWLETT-PACKARD Serial No:9809100953460702 port 2: id Vendor: FINISAR CORP.
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 86
    move the cursor right append insert delete undo Example To display previous shell commands: switch:admin> h 1 version 2 switchShow 3 portDisable 2 4 portEnable 2 5 switchShow 86 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 87
    help Display help information for commands. Synopsis help [command] Availability All users Description Use this command without an operand to display an alphabetical list of commands that provide help information. At the end of the list are additional commands that display groups of commands;
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 88
    Table 8) Program counter Stack pointer Most recent error code for this task If task is delayed, number of clock ticks remaining 88 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 89
    The fields in the following table indicate task status. Table 8. Field READY PEND DELAY SUSPEND DELAY+S PEND+S PEND+T PEND+S+T DEAD Description Task is not waiting for any resource other than the CPU Task is blocked due to the unavailability of a resource Task is asleep for a duration Task is
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 90
    10191b78 103ad9e0 3d0004 0 tNSd _ns_svr 10397050 150 PEND 10191b78 103973e0 0 0 tASd _as_svr 1036f5b0 150 PEND 10191b78 1036f930 0 0 See Also diagHelp routeHelp 90 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 91
    the change is saved and the command exits. The system must be rebooted for changes to take effect. Changing the link mode is not supported for all network interfaces or for all Ethernet network interfaces. At present, this command is only functional for "fei" interfaces. Exercise care when using
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 92
    mode for the "fei0" Ethernet interface: switch:admin> ifModeShow "fei0" fei (unit number 0): Link mode: Auto-negotiate See Also ifModeSet ifShow 92 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 93
    ifShow Display network interface information. Synopsis ifShow ["ifName"] Availability All users Description Use this command to display network interface status. If the operand ifName is provided, only that interface is displayed. If ifName is omitted, all interfaces are displayed. Each switch
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 94
    0 Maximum Transfer Unit size is 1500 42962 packets received; 127 packets sent 0 input errors; 0 output errors 7 collisions See Also ipAddrSet ipAddrShow 94 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 95
    interfaceShow Display FSPF interface information. Synopsis interfaceShow [portnumber] Availability All users Description Use this command to display data structures associated with FSPF interfaces (E_Ports) on the switch. There are two data structures - the permanently allocated Interface Descriptor
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 96
    ) retransmission list. Pointer to the Link State Acknowledgements (LSA) retransmission list. Inactivity timer ID. Hello timer ID. Database retransmission timer ID. 96 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 97
    lsrRtxTID inactTo helloTo rXmitTo nCmdAcc nInvCmd nHloIn nInvHlo nLsuIn nLsaIn attHloOut nHloOut Telnet Commands LSR retransmission timer ID. Inactivity time-out value, in milliseconds. When this time-out expires, the adjacency with the neighbor switch is broken and new paths are computed to all
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 98
    ) retransmission list. Pointer to the Link State Acknowledgements (LSA) retransmission list. Inactivity timer ID. Hello timer ID. Database retransmission timer ID. 98 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 99
    upCount lastUpTime downCount lastDownTime downReason iState state nghbCap nghbId idbNo remPort nflags initCount &dbRetransList &lsrRetransList &lsrAckList inactTID helloTID dbRtxTID Number of times this interface came up, with respect to FSPF. Last time this interface came up. Number of times this
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 100
    switch. Number of attempted transmissions of Hello frames to the neighbor switch. Number of Hello frames transmitted to the neighbor switch. 100 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 101
    attLsuOut nLsuOut attLsaOut nLsaOut Number of attempted transmissions of LSUs to the neighbor switch. Number of LSUs transmitted to the neighbor switch. Number of attempted transmissions of LSAs to the neighbor switch. Number of LSAs transmitted to the neighbor switch. Operands This command has
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 102
    a fabric topology change. Operands None. Example To turn off the in-order delivery option: switch:admin> iodReset See Also iodSet iodShow 102 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 103
    iodSet Turn on the in-order delivery option. Synopsis iodSet Availability admin Description Use this command to enforce in-order delivery of frames during a fabric topology change. In a stable fabric, frames are always delivered in order, even when the traffic between switches is shared among
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 104
    display the current setting of the in-order delivery option: switch:admin> iodShow IOD is not set See Also iodSet iodReset 104 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 105
    ipAddrSet Set Ethernet and FC IP addresses. Synopsis ipAddrSet Availability admin Description Use this command to set Ethernet and FC IP addresses. You are prompted for address end mask information: • Ethernet IP Address: IP address of the Ethernet port • Ethernet Subnetmask: IP subnet mask of
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 106
    Subnetmask [none]: Gateway Address [192.168.1.1]: Committing configuration...done. Set IP addresses now? [y = set now, n = next reboot]: y See Also ifShow ipAddrShow 106 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 107
    ipAddrShow Display Ethernet and FC IP addresses. Synopsis ipAddrShow Availability All users Description Use this command to display Ethernet and fibre channel IP addresses. Address and mask information is shown: • Ethernet IP Address: IP address of the ethernet port • Ethernet Subnetmask: IP
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 108
    will be displayed. A switch with properly configured ISL connections will report a status of "OK" for each of these ports. Operands None. 108 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 109
    Example The following example shows the results of islTopoCheck on a mis-configured switch. In a proper configuration, all of the switches would have valid domains and names and the status of each port would be OK. switch:admin> islTopoCheck ISL data for type: S32_6_1, sgroup: My_group idx domain
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 110
    entered, the default behavior is to display the topology status for all ISL sgroups of which the current switch is a member. 110 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 111
    Example The following example shows the results of islTopoShow on a mis-configured switch. In a proper configuration, all of the switches would have valid domains and names and the status of each port would be OK. switch:admin> islTopoShow ISL data for type: S32_6_1, sgroup: My_group idx domain
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 112
    add a license key to the switch: switch:admin> licenseAdd "bQebzbRdScRfc0iK" adding license key "bQebzbRdScRfc0iK" Committing configuration...done. See Also licenseRemove licenseShow 112 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 113
    licenseHelp Display commands used to administer license keys. Synopsis licenseHelp Availability admin Description Use this command to display a list of the commands used to administer license keys. Operands None. Example To display license commands: switch:admin> licenseHelp licenseAdd Add
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 114
    remove a license key from the switch: switch:admin> licenseRemove "bAaAabRdScRfc0iK" removing license key "bAaAabRdScRfc0iK" Committing configuration...done. See Also licenseAdd licenseShow 114 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 115
    licenseShow Display current license keys. Synopsis licenseShow Availability All users Description Use this command to display current license keys along with a list of licensed products enabled by these keys; none is displayed if no license keys are installed. Operands None. Example In this example,
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 116
    all the ISLs traversed by the path. The cost of a path is also known as the "metric". FSPF supports load sharing over a number of equal cost paths. Every ISL has a default cost that is inversely proportional to the to interface portnumber. This operand is optional. 116 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 117
    Example To display the FSPF cost of a link, and reset the cost: switch:admin> linkCost 1 Interface: 1 cost 1000 switch:admin> linkCost 1,2000 Committing configuration...done. switch:admin> linkCost 1 Interface: 1cost 2000 See Also interfaceShow LSDbShow topologyShow uRouteShow login Log in as a
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 118
    the beginning of a line. Operands None. Example To log out from a rlogin session: switch:admin> logout Connection closed. See Also login 118 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 119
    loopdiagClear Clear information from management layers. Synopsis loopdiagClear port Availability admin Description This command will clean up any residue information from a previous failed session in management layers. It releases all the resources created for the port specified. Operands This
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 120
    : port The physical port number where loopdiag executes. Example To complete loopdiag at port 5: switch:admin> loopdiagDone 5 See Also loopdiagStart loopdiagStop 120 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 121
    LSDbShow Display the FSPF Link State Database. Synopsis LSDbShow [domain] Availability All users Description Use this command to display a link state database record for switches in the fabric. There are two data structures - the permanently allocated Link State Database Entry and the Link
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 122
    use. type Type of the LSR. Always 1. options Always 0. lsId ID of this LSR. It is identical to the domain number. 122 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 123
    Table 9. LSDbShow display fields (continued) Field Description advertiser ID (domain number) of the switch that originated this LSR. incarn Incarnation number of this LSR. length Total length (in bytes) of this LSR. Includes header and link state information for all links. chksum Checksum
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 124
    = 5, out port = 6, rem port = 3, cost = 1000, costCnt = 0, type = 1 LinkId = 5, out port = 7, rem port = 4, cost = 1000, costCnt = 0, type = 1 See Also interfaceShow nbrStateShow 124 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 125
    mcastShow Display multicast routing information. Synopsis mcastShow [group_ID] Availability All users Description Use this command to display the multicast routing information, as it is known by the FSPF path selection and routing task, for all ports in the switch. The multicast routing
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 126
    routing information: switch:admin> mcastShow 9 Group Member Ports Member ISL Ports Static ISL Ports 9 0x00002083 0x00002080 0x00000000 See Also bcastShow portRouteShow 126 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 127
    msConfigure Configure the Management Server. Synopsis msConfigure Availability admin Description Use this command to display and configure parameters used to access the Management Server. The Management Server allows a storage area network (SAN) management application to retrieve and administer
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 128
    Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... switch:admin> See Also msPlCapabilityShow msPlMgmtActivate msPlMgmtDeactivate msPlClearDB 128 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 129
    object in the database. Platform Database Management is available in firmware v2.3 and above. Lower level firmware releases do not support Platform Database Management. Operands None. Example To display the Management Server platform database for a fabric: switch:admin> msPlatShow Platform Name
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 130
    in v2.3 and later. Lower level firmware releases will not be able to support Platform Database Management. Operands None Example To clear the Management Server platform database on See Also msPlMgmtDeactivate msPlatShow msPlCapabilityShow msPlMgmtActivate 130 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 131
    : Bit 0: Basic Configuration Service Supported. Bit 1: Platform Management Service Supported. Bit 2: Topology Discovery Service Supported. Bit 3: Unzoned Name Server Service Supported. Bit 4: M.S. Fabric Zone Service Supported. Bit 5: Fabric Lock Service Supported. Others: Reserved. Done
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 132
    service is DISABLED. Limitations Platform Database Management is available in firmware v2.3 and later. Lower level firmware releases do not support Management services.... Done. switch:admin> See Also msPlMgmtDeactivate msPlatShow msPlCapabilityShow msPlClearDB 132 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 133
    DISABLED. By default, the Platform Management service is DISABLED. Limitations Platform Database Management is available in firmware v2.3 and later. Lower level firmware releases do not support Platform Database Management. Operands None. Example To deactivate the Platform Database on all
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 134
    This command has the following operand: portnumber Specify the port number for the counters to be reset. This operand is optional. 134 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 135
    Example To display how to reset the counters on port 4: switch:admin> interfaceShow 4 idbP = 0x10f61f40 Interface 4 data structure: nghbP = 0x10f61d90 ifNo = 4 defaultCost = 1000 cost = 1000 delay = 1 lastScn = 5 lastScnTime = Mar 29 12:57:52.833 upCount = 2 lastUpTime = Mar 29
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 136
    This command has the following operand: portnumber Specify the port on the local switch that connects to the neighbor being displayed. 136 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 137
    Example To display information about switches directly connected to the local switch: switch:admin> nbrStateShow Local Domain ID: 15 Local Port Domain Remote Port State 2 13 13 NB_ST_FULL 6 13 9 NB_ST_FULL 7 13 8 NB_ST_FULL 13 3 7 NB_ST_FULL See Also interfaceShow Telnet
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 138
    0118e8 0118ef 0214e2 0214e4 0214e8 0214ef } switch:admin> nsAllShow 5 2 FC-IP Ports in the Fabric { 011200 021200} See Also nsShow switchShow 138 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 139
    entry from another switch Type U for unknown, N for N_Port, NL for NL_Port Pid 24-bit fibre channel address COS list of classes of service supported by device PortName device port worldwide name NodeName device node worldwide name TTL time-to-live (in seconds) for cached entries, or na
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 140
    lines if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4s supported • IP address • IPA • port and node symbolic names • fabric port name • hard address and/or port IP address Operands None. 140 Fabric
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 141
    Example To display local name server information: switch:admin> nsShow The Local Name Server has 7 entries { Type Pid COS PortName NodeName TTL(sec) *N 011200; 2,3;10:00:00:60:69:00:ab:ba;10:00:00:60:69:00:ab:ba; 60 FC4s: FCIP N 021200; 2,3;10:00:00:60:69:00:03:19;30:00:00:60:69:00:03:19;
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 142
    is available only on specific switch models. If the current switch does not support parity checking, an error is displayed. Operands This command has the following Parity check is now OFF. switch:admin> parityCheck 0 Parity not supported on system model: 4 Parity check already OFF. See Also ramTest
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 143
    passwd Change system login name and password. Synopsis passwd ["user"] Availability All users Description Use this command to change the system login name and password. To change the login name and password for a specific user, enter the command with the optional "user" operand. To change the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 144
    to that of a previously existing user. Incorrect password. You have not entered the correct password when prompted for the old password. 144 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 145
    Password unchanged. You have entered the carriage return special input case, choosing not to change the password. Number of failure attempts exceeded. You have made 3 unsuccessful attempts to enter and verify a new password. Passwords do not match; try again. You have not correctly verified the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 146
    must also be present. When no operand is specified, the command reports a list of ports that are disabled from becoming E_Ports. 146 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 147
    Example To disable port 3 from becoming an E_Port: switch:admin> portCfgEport 3, 0 Committing configuration...done. switch:admin> portCfgEport Ports: 0 1 2 3 4 5 6 7 NO - - - - See Also portShow switchShow Telnet Commands 147
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 148
    . Example The following example configures switch port 3 as a locked G_Port: switch:admin> portCfgGport 3, 1 Committing configuration...done. See Also portShow switchShow configure 148 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 149
    portCfgLport Lock a port as an L_PORT. Synopsis portCfgLport port_number mode Availability admin Description This command enables a user to designate a port as an L_PORT. The switch will then only attempt to initialize that port as an FL_PORT. The switch will never attempt point-to-point (F_PORT
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 150
    1, or 2: 0 Reconfigures port as a regular switch port. The number of buffers reserved for the port supports links up to 10 km. 1 Level one long distance, up to 50 km. A total of 27 For more information, see the Extended Fabrics User's Guide for more information. 150 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 151
    distance ports, the long distance fabric mode must be set to "off" for that switch. Example To configure switch port 3 to support a 100 km link: switch:admin> portCfgLongDistance 3 Please enter the long distance level -- : (0..2) [0] 2 Committing configuration...done. See Also configure portShow
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 152
    Fx_Port. • The switch is a branch (middle) switch. A warning message is printed if another port is already configured as the multicast loopback. 152 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 153
    There are several things that occur when a port is configured as a multicast loopback port: • The green port LED will blink slowly, indicating a loopback state. If optical GBIC is applied, the laser will be disabled and will not respond to any attempt to connect to any device. • The comment field
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 154
    depending on the switch type. This operand is required. Example To disable port 4: switch:admin> portDisable 4 See Also portEnable portShow switchShow 154 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 155
    portEnable Enable a switch port. Synopsis portEnable portnumber Availability admin Description Use this command to enable a switch port. If the port is connected to another switch, the fabric may reconfigure. If the port is connected to one or more devices, the devices can communicate with the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 156
    discarded. Link failures (LF1 or LF2 states). Loss of synchronization. Loss of signal. Frames rejected with F_RJT. Frames busied with F_BSY. 156 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 157
    Example The following example shows an eight-port switch. Notice in the example that port 6 has a high number of errors and should be examined. switch:admin> portErrShow frames enc crc too too bad enc disc link loss loss frjt fbsy tx rx in err shrt long eof out c3 fail sync sig 0: 0 0 0 0 0 0 0 0
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 158
    errors disable the port log: FCIU, IUBAD FCIU, IUCOUNT FCPH, EXCHBAD FCPH, EXCHFREE NBFSM, DUPEPORTSCN UCAST, RELICPDB See Also portLogDump portLogShow 158 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 159
    portLogDump Display the port log without page breaks. Synopsis portLogDump [count[, saved]] Availability All users Description Use this command to display the port log, listing all entries in the log without page breaks. This command displays the same information as portLogShow, but portLogShow
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 160
    :15.499 tShell ioctl 15 de 10f9bb90,0 16:58:28.383 tShell create tSyslog Sr99:admin> See Also portLogClear portLogShow uptime 160 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 161
    portLogShow Display the port log. Synopsis portLogShow [count[, saved]] Availability All users Description Use this command to display the port log; 22 entries are displayed at a time. portLogShow displays the same information as portLogDump, but it allows you to enter a "return" after each page
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 162
    master BMP - loop initialization completed, FL_Port in MONITORING state OLD - port transited to the OLD_PORT state TMO - loop initialization times out 162 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 163
    Table 11. PortLogShow fields (continued) Field Description rejec received frame is rejected busy received frame is busied ctin CT based request is received ctout CT based response is transmitted errlog message is added to the error log loopscn loop state change notification is posted create
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 164
    master BMP - loop initialization completed, FL_Port in MONITORING state OLD - port transited to the OLD_PORT state TMO - loop initialization times out 164 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 165
    into two 16-bit fields: [A] bit map indicating validity of subsequent args (0001 = argument 1 is valid, 0003 = arguments 1 and 2 are valid) [B] ct-based service command code Argument 1 = first word of the CT payload, if applicable (as specified in [A]) Argument 2 = second word of the CT payload, if
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 166
    include: 2 LIP (req. INITIALIZING) timeout 94F0F0 ARB(F0) timeout 40 CLS timeout Codes: state 1 Online 2 Offline 3 Testing 4 Faulty 5 E_Port 6 F_Port 7 Segmented 166 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 167
    pstate ioctl AC Active State LR1 Link Reset: LR Transmit State LR2 Link Reset: LR Receive State LR3 Link Reset: LRR Receive State LF1 Link Failure: NOS Transmit State LF2 Link Failure: NOS Receive State OL1 Offline: OLS Transmit State OL2 Offline: OLS Receive State OL3 Offline: Wait for OLS State
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 168
    . See uptime for a list of conditions that cause a fault. count is ignored when displaying the saved log. This operand is optional. 168 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 169
    Example The following example illustrates a section of the port log with an E_Port coming online. The ELP and EFP exchanges are shown; a name service request was processed. switch:admin> portLogShow 5 May 1 task event port cmd args 06:48:01.623 interrupt scn 13 2 06:48:02.359 tFspf ioctl
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 170
    all ports present until these results occur: - The number of frames (or passCount) requested is reached. - All ports are marked bad. 170 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 171
    At each pass, the frame is created from a different data type. If seven passes are requested, seven different data types are used in the test. If eight passes are requested, the first seven frames use unique data types, and the eighth is the same as the first. There are seven data types: 1. CSPAT:
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 172
    DIAG-XMIT DIAG-TIMEOUT DIAG-ERRSTAT DIAG-STATS DIAG-DATA See Also camTest centralMemoryTest cmemRetentionTest cmiTest crossPortTest portRegTest ramTest spinSilk sramRetentionTest 172 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 173
    portPerfShow Display port throughput performance in bytes, kilobytes, or megabytes. Synopsis portPerfShow [interval] Availability All users Description Use this command to display throughput information for all ports on the switch (8 or 16 columns depending on the switch model). One output line
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 174
    following pattern to test a 6-bit register: 1. 0x0001 2. 0x0002 3. 0x0004 4. 0x0008 5. 0x0010 6. 0x0020 7. 0x0040 8. 0x0080 9. 0x0100 10.0x0200 11.0x0400 12.0x0800 174 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 175
    13.0x1000 14.0x2000 15.0x4000 16.0x8000 Repeat the preceding steps until all ASIC SRAMs and registers have been tested. Operands None. Example To run a bit write/read test of the ASIC SRAMs and registers: switch:admin> portRegTest Running Port Register Test .... passed. Errors There are three
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 176
    Because the destination_port is in the local switch, output_ports_bitmap usually contains one bit with a bit position number representing the destination_port number. 176 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 177
    Multicast routing Shows multicast frame routing to the destination table multicast group. Output format is mcast_group_number: (mcast_group_id) ports_bitmap where: mcast_group_number is the multicast group number. mcast_group_id is the multicast frame destination ID. ports_bitmap is a hex
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 178
    unicast routing table: 0: 0x1 3: 0x4 6: 0x40 multicast routing table: broadcast routing table: 0x10045 See Also bcastShow fabricShow mcastShow switchShow topologyShow uRouteShow 178 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 179
    portShow Display port status. Synopsis portShow portnumber Availability All users Description Use this command to display status information for a port. Information varies with the switch model and port type. The display shows the fields in the following table. Table 12. PortShow display fields
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 180
    Specify the port number to be displayed. Valid values are 0-7 or 0-15 depending on the switch type. This operand is required. 180 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 181
    Example To display the status for a specified E_Port: switch:admin> portShow 1 portFlags: 0x20041 PRESENT U_PORT LED portType: 3.1 portState: 2 Offline portPhys: 4 No_Light portScn: 0 portRegs: 0x80020000 portData: 0x10fa70a0 portId: 011100 portWwn: 20:01:00:60:69:00:73:71 Distance:
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 182
    . Frames longer than maximum. Frames with bad end-of-frame. Encoding error outside frames. Class 3 frames discarded. Number of OPNyx sent. 182 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 183
    fl_opened fl_openfr fl_cls_idle fl_cls_rx fl_bb_stall fl_cf_alloc fl_cf_opn fl_cf_full fl_cf_na fl_trig_age fl_trig_lp open transfer opened starve_stop fl_tenancy nl_tenancy frame_nozone Number of OPNyx received. Number of OPNfr sent. CLS sent due to loop idle. CLS received when OPEN. OPN/CLS
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 184
    er_bad_eof 0 Frames with bad end-of-frame er_enc_out 3 Encoding error outside of frames er_disc_c3 0 Class 3 frames discarded See Also portErrShow portShow 184 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 185
    psShow Display power supply status. Synopsis psShow Availability All users Description Use this command to display the switch power supply status. The display format varies with switch model and number of power supplies present. The status of each supply is shown: OK Power supply present and
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 186
    : switch:admin> quietMode Quiet Mode is OFF switch:admin> quietMode 1 Committing configuration...done. Quiet Mode is now ON See Also ramTest 186 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 187
    ramTest Bit write/read test of SDRAMs in the switch. Synopsis ramTest [patternSize] Availability admin Description Use this command to verify the address and data bus of the SDRAMs that serve as the 16 MB CPU memory in the switch. The test consists of two subtests: 1. The address subtest
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 188
    if failures are detected: DIAG-MEMORY DIAG-MEMSZ DIAG-MEMNULL See Also camTest centralMemoryTest cmemRetentionTest cmiTest crossPortTest portLoopbackTest portRegTest spinSilk sramRetentionTest 188 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 189
    reboot Reboot the switch. Synopsis reboot Availability admin Description Use this command to reboot the switch. The reboot takes effect immediately as the switch resets, and then executes the normal power-on booting sequence. While the switch is rebooting, the telnet session is closed and all
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 190
    to domain(s) Configure static unicast route Remove static unicast route Print port's unicast routing info See Also bcastShow interfaceShow uRouteRemove uRouteShow 190 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 191
    enabled, forces crossPortTest and spinSilk to limit testing to ports with GBICs present. Consequently, testing is limited to those ports with a suspected problem. Operands This command has the following operand: mode Specify whether to enable or disable GBIC mode. Specify 1 to enable GBIC mode or
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 192
    to disable two-port loopback for M->M connected ports. This may be useful to isolate internal switch problems from GBIC problems since the internal paths are used much less with SPLB mode enabled. The SPLB mode, when disabled P2 RX -> P1 TX P2 TX >>> P1 RX -> P2 TX 192 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 193
    Operands This command has the following operand: mode Specify whether to enable or disable SPLB mode. Specify 1 to enable GBIC mode or 0 to disable SPLB mode. The default value (if no operand specified) is 0. Example To enable or disable a 2-port loopback: switch:admin> setSplbMode 1 Committing
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 194
    Group Name: [ ] MyGroup About to DELETE the group with Group name "MyGroup" ARE YOU SURE (yes, y, no, n): [no] y Committing configuration...done. 194 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 195
    This example shows what happens when an invalid group is entered: switch:admin> sgroupDelete "MyPrevGroup" Group Name "MyPrevGroup" does not exist. See Also sgroupRename sgroupSet sgroupShow sgroupSupportShow sgroupSwReplace sgroupRename Rename a switch group. Synopsis sgroupRename ["old_sgName
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 196
    :00:60:69:00:30:05 10:00:00:60:69:00:60:11 See Also sgroupDelete sgroupSet sgroupShow sgroupSupportShow sgroupSwReplace 196 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 197
    sgroupSet Create a switch group. Synopsis sgroupSet ["sgType", "sgName", "sgMemberList"] Availability admin Description This command creates a switch group. If any parameter is not specified, the session will become an interactive session for which all the parameters will be prompted. Operands
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 198
    :00:00:00] 10:00:00:60:69:00:60:11 Committing configuration...done. See Also sgroupDelete sgroupRename sgroupShow sgroupSupportShow sgroupSwReplace 198 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 199
    sgroupShow Display switch group configuration information. Synopsis sgroupShow ["sgType" | "sgName"] Availability all users Description This command displays switch group information. If no parameter is specified, ALL sgroup definitions will be displayed. If a parameter is specified, ALL
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 200
    :00:60:11 Note Since MyNewGroupName contains the key word "Group", it is displayed. See Also sgroupDelete sgroupRename sgroupSet sgroupSupportShow sgroupSwReplace 200 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 201
    for all the switches in a switch group. If no commandName is specified or "all" is specified in place of a command name, all the supported commands are displayed for the all the switches within a switch group. If a single command is specified, only the information for that command is displayed
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 202
    82 84 89 91 91 Fahrenheit Information from Domain 9 27 29 33 34 32 Centigrade 80 84 91 93 89 Fahrenheit 202 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 203
    Information from Domain 10 26 30 31 34 31 Centigrade 78 86 87 93 87 Fahrenheit Information from Domain 11 28 29 31 33 32 Centigrade 82 84 87 91 89 Fahrenheit Information from Domain 12 28 31 34 35 33 Centigrade 82 87 93 95 91 Fahrenheit DONE See Also sgroupDelete sgroupRename sgroupSet
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 204
    example, "10:00:00:60:69:20:55:55"). The WWN must be enclosed in quotation marks. This operand is optional. 204 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 205
    Example The example shows the noninteractive form of sgroupSwReplace. The sgroupShow command is used to illustrate the changes made with the sgroupSwReplace command. To replace a member of an sgroup: switch:admin> sgroupShow Group Type Group Name Member WWN S32_6_1 NewGroup 10:00:00:60:69
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 206
    none Example To view or modify the options for configuring SNMP MIB traps: switch:admin> snmpmibcapset The SNMP Mib/Trap Capability has been set to support FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP FA-MIB (yes, y, no, n): [yes] SW-TRAP (yes, y, no, n): [yes] FA-TRAP (yes, y, no, n): [yes
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 207
    spinSilk Functional test of port M->N path at maximum switch speed. Synopsis spinSilk [nMillionFrames] Availability admin Description Use this command to verify the functional operation of the switch at the maximum speed of 1 Gbps. To run spinSilk, set up the routing hardware so that frames
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 208
    used: CSPAT: BYTE_LFSR: RANDOM: RDRAM_PAT: 0x7e, 0x7e, 0x7e, 0x7e, ... 0x69, 0x01, 0x02, 0x05, ... 0x25, 0x7f, 0x6e, 0x9a, ... 0xff, 0x00, 0xff, 0x00, ... 208 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 209
    GBIC Mode If spinSilk is executed with GBIC mode activated, only ports containing GBICs are tested. To activate GBIC mode, execute the following command prior to executing spinSilk: switch:admin> setGbicMode 1 The state of the GBIC mode is saved in flash memory and remains active (even after
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 210
    . port 13 Rx/Tx 1 of 1 million frames. port 14 Rx/Tx 1 of 1 million frames. port 15 Rx/Tx 1 of 1 million frames. 210 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 211
    Diagnostics Status: Tue Apr 6 04:10:12 1999 port#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 diags: OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK state: UP UP UP UP UP UP UP UP UP UP UP UP UP UP UP UP lm0: lm1: lm2: lm3: lm4: lm5: lm6: lm9: lm10: lm11: lm12: lm13: lm14: lm15: 2059619 frTx 2054565
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 212
    default value is 1. This command is optional. Example To run a data retention test: switch:admin> sramRetentionTest Running SRAM Retention Test ... passed. 212 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 213
    Errors There are three possible error messages if failures are detected: DIAG-REGERR DIAG-REGERR_UNRST DIAG-BUS_TIMEOUT See Also camTest centralMemoryTest cmemRetentionTest cmiTest crossPortTest portLoopbackTest ramTest spinSilk Telnet Commands 213
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 214
    .portSemShow 13.portShow 14.portRegShow 15.portRouteShow 16.fabricShow 17.topologyShow 18.qlShow 19.nsShow 20.nsAllShow 21.cfgShow 22.configShow 214 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 215
    23.faultShow 24.traceShow 25.portLogDump Operands This command has the following operands: firstPort lastPort nLog Specify the first port, of a range of ports, to dump information. The default (if no operand is specified) is to print state of port 0. If only firstPort is specified, only
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 216
    Power Supply #2 is absent byRdzdSRxyczSe0D: Web license Diagnostics Status: Tue Apr 6 16:22:34 1999 < ... sample output truncated ... > See Also switchShow 216 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 217
    switchBeacon Set switch beaconing mode on or off. Synopsis switchBeacon 0|1 Availability admin Description Use this command to set the switch beaconing mode on (if the operand is 1) or off (if the operand is 0). When beaconing mode is turned on, the port LEDs flash amber in a running pattern
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 218
    panel LED changes to a slow flashing yellow. Operands None. Example To disable the switch: switch:admin> switchDisable See Also switchEnable switchShow 218 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 219
    switchEnable Enable the switch. Synopsis switchEnable Availability admin Description Use this command to enable the switch. All fibre channel ports that passed POST are enabled. They can come online if connected to a device, or remain offline if disconnected. A switch may need to be enabled if
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 220
    is optional. Example To change a switch name to sw10: switch:admin> switchName "sw10" Updating flash ... sw10:admin> See Also switchShow fabricShow 220 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 221
    switchShow Display switch and port status. Synopsis switchShow Availability All users Description Use this command to display switch and port status information. Information may vary by switch model (see list that follows). The first section provides switch summary information; it is followed
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 222
    marked faulty Diag_Flt - port failed diagnostics Lock_Ref - locking to the reference signal Testing - running diagnostics Online - port is up and running 222 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 223
    comment Operands None. The comment field may be blank, or it may display: Disabled - port is disabled Bypassed - port is bypassed (loop only) Loopback - port is in loopback mode E-Port - fabric port, shows WWN of attached switch F-Port - point-to-point port, shows WWN of attached N_Port G-Port -
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 224
    port 12: lw No_Light port 13: sw No_Light port 14: -- No_Module port 15: -- No_Module switch:admin> See Also switchDisable switchEnable switchName 224 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 225
    switchStatusPolicySet Set the policy parameters that determine the overall switch status. Synopsis switchStatusPolicySet Availability admin Description Use this command to set the policy parameters for calculating the overall status of the switch enclosure. The policy parameter values determine
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 226
    to (0,0). By configuring these options, the user can more closely monitor for port status and/or removal of GBICs. Operands None. 226 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 227
    Example Notice that in the following example, the only parameters modified are the number of FaultyPorts allowed before the status of the switch changes to MARGINAL and DOWN. switch:admin> switchStatusPolicySet To change the overall switch status policy parameters The current overall switch
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 228
    DOWN parameter is set to 3, and three ports fail in the switch, then the status of the switch changes to DOWN. 228 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 229
    Operands None. Example To display the switch status policy: switch:admin> switchStatusPolicyShow The current overall switch status policy parameters: Down Marginal FaultyPorts 1 0 MissingGBICs 0 1 PowerSupplies 2 1 Temperatures 3 1 Fans 3 1 PortStatus 0 0 sgroup ISLStatus 2 1
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 230
    - one or more contributors have failed If the overall status is not HEALTHY/OK, the contributing factors are listed. Operands None. 230 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 231
    Examples Two examples are shown: The first shows a switch with a status of MARGINAL; the second shows the same switch after all the errors have been fixed. switch:admin> switchStatusShow The overall switch status is Marginal/Warning Contributing factors: * 1 missing power supply triggered the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 232
    all error log entries to the syslogd on the specified servers. Up to six servers are supported. Operands This command has the following operand: IP_address Specify the IP address of the server configuration...done. See Also errShow syslogdIpRemove syslogdIpShow 232 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 233
    syslogdIpRemove Remove the IP address of a syslog daemon. Synopsis syslogdIpRemove IP_address Availability admin Description Use this command to remove the IP address of a syslog daemon, that is, the IP address of the server that is running the syslogd process. Operands This command has the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 234
    .address.1: 192.168.1.60 syslog.IP.address.2: 192.168.1.88 syslog.IP.address.3: 192.168.2.77 See Also errShow syslogdIpAdd syslogdIpRemove 234 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 235
    tempShow Display temperature readings. Synopsis tempShow Availability All users Description Use this command to display the current temperature readings from each of five temperature sensors located on the main printed circuit board of the switch. The sensors are located, approximately, one in
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 236
    :admin> timeOut TimeOut is Disabled sw5:admin> timeOut 10 Committing configuration...done. TimeOut is now 10 minutes See Also help version 236 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 237
    topologyShow Display the unicast fabric topology. Synopsis topologyShow [domainnumber] Availability All users Description Use this command to display the fabric topology, as it appears to the local switch: • A list of all domains that are part of the fabric, and to each of those domains, all
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 238
    4 Local Domain ID: 1 Domain Metric Hops Out Port In Ports Flags Name 4 2000 2 2 0x00002000 D "sw10" 2 6 0x00000000 D 2 7 0x00000000 D See Also portRouteShow uRouteShow 238 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 239
    trackChangesSet Enables configuring of track-changes feature. Synopsis trackChangesSet [ mode ], [ snmptrapmode ] Availability admin Description This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be enabled. There are several trackable changes: • successful
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 240
    > trackChangesSet 0, 0 0x10f9bcd0 (tShell): Feb 10 15:04:50 Error TRACK-TRACK_OFF, 4, Track-changes off Committing configuration...done. See Also agtcfgSet agtcfgShow 240 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 241
    uptime Display length of time the system has been operational. Synopsis uptime Availability All users Description Use this command to display the length of time the system has been in operation (also known as "up time"), the total cumulative amount of up time since the system was first powered-
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 242
    an asterisk (*) are usually caused by hardware or firmware failures. Information on the failure is stored in the switch. Follow the procedures in the switch manual. Operands None. Example To display the up time for a switch: switch:admin> uptime Up for: 3 days, 18:35 Powered for: 30 days, 16:05
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 243
    uRouteConfig Configure a static route. Synopsis uRouteConfig portnumber, domainnumber, outputportnumber Availability admin Description Use this command to configure static routes. A static route is assigned a specific path; the path does not change with a topology change unless the path becomes
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 244
    configuration will now contain the static route: switch:admin> configShow "route" route.ucastRoute.1.2: 5 route.ucastRouteCount: 1 See Also configShow interfaceShow uRouteRemove uRouteShow 244 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 245
    uRouteRemove Remove a static route. Synopsis uRouteRemove portnumber, domainnumber Availability admin Description Use this command to remove a statically configured route. When this command is issued, the route to domainnumber for portnumber may not change. It does not change if the previous
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 246
    the next hop. These are the domain number and the port number of the switch to which Out Port is connected. 246 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 247
    Operands This command has the following operands: No Operand Displays routing information for all active ports on the local switch, to all the domains in the fabric. portnumber Displays routing information for port portnumber to all the domains in the fabric. portnumber, domainnumber Displays
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 248
    22 15:21:20 PST 1999 BootProm: Tue Dec 29 17:32:00 PST 1998 switch:admin> See Also firmwareDownload reboot 248 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 249
    2 ERROR MESSAGES This chapter explains the Fabric OS error message format and possible errors: • "System Error Message Formats" on page 250 • "Displaying Error Messages Using Telnet" on page 251 • "Resetting Bad Ports" on page 252 • "POST Test Commands" on page 252 • "POST Test Failure and Recovery
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 250
    the shell if too many error messages are received consecutively, but the data in errShow/errDump, syslog, and snmp is correct. 250 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 251
    Figure 1. errShow Command Example Displaying Error Messages Using Telnet To display the error messages compiled by your system, perform the following procedure: 1. Log in as an admin user to the switch, using a telnet connection. 2. From the prompt, enter the errShow command. 3. To scroll through
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 252
    Chapter 1. Note The cold boot (power reset) runs the long ramTest, while the warm boot (software reset) runs the short ramTest. 252 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 253
    POST Test Failure and Recovery Actions This section provides information on what actions to perform if the switch fails any of the POST tests. Note If you run the portStatsShow or the diagShow command prior to running an individual test, errors may appear as a result of the normal synchronization
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 254
    -REGERR_UNRST DIAG-BUS_TIMEOUT DIAG-LCMRS DIAG-LCMTO DIAG-LCMEM DIAG-MEMORY DIAG-MEMSZ DIAG-MEMNULL DIAG-REGERR DIAG-REGERR_UNRST DIAG-BUS_TIMEOUT 254 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 255
    Table 17. Error Message Numbers (continued) Error Number Test Name Error Name 1020 centralMemoryTest* DIAG-CMBISRTO 1021 DIAG-CMBISRF 1025 DIAG-LCMRS 1026 DIAG-LCMTO 1027 DIAG-LCMEM 1028 DIAG-LCMEMTX 1029 DIAG-CMNOBUF 102A DIAG-CMERRTYPE 102B DIAG-CMERRPTN 102C DIAG-INTNOTCLR
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 256
    266F DIAG-TIMEOUT 2660 DIAG-STATS(FTX) 2661 DIAG-STATS(FRX) 2662 DIAG-STATS(C3FRX) 2670 DIAG-PORTABSENT 2671 DIAG-XMIT 256 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 257
    Table 17. Error Message Numbers (continued) Error Number Test Name Error Name 3040 crossPortTest DIAG-ERRSTAT(ENCIN) 3041 DIAG-ERRSTAT(CRL) 3042 DIAG-ERRSTAT(TRUNC) 3043 DIAG-ERRSTAT(2LONG) 3044 DIAG-ERRSTAT(BADEOF) 3045 DIAG-ERRSTATENCOUT) 3046 DIAG-ERRSTAT(BADORD) 3047 DIAG-
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 258
    run during the POST (power on self test). For more information about these tests, see the individual command description in Chapter 3. 258 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 259
    Diagnostic Error Messages This section provides information on the probable cause of a diagnostic error and what actions to take. Table 18. Diagnostic Error Messages Message Description DIAG-BADINT Err#1030, 2030 Port received an unexpected interrupt Probable Cause Action ASIC failure
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 260
    [cmiTest] DIAG-CMIDATA Err#2035 CMI data received did not match ASIC or data transmitted mainboard failure Replace mainboard assembly [cmiTest] 260 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 261
    Table 18. Diagnostic Error Messages (continued) Message Description DIAG-CMIINVCAP Err#2034 Unintended ASIC erroneously got CMI capture flag Probable Cause Action ASIC or mainboard failure Replace mainboard assembly [cmiTest] DIAG-CMINOCAP Err#2033 CMI intended receiver ASIC failed to get
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 262
    module, or fibre cable DIAG-INTNIL Err#2031 ASIC failed to get a CMI error ASIC failure (interrupt) Replace mainboard assembly [cmiTest] 262 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 263
    Table 18. Diagnostic Error Messages (continued) Message Description DIAG-INTNOTCLR Err#102C The interrupt bit could not be cleared Probable Cause Action ASIC failure Replace mainboard assembly [centralMemoryTest] DIAG-LCMEM Err#1027 [centralMemoryTest, cmemRetentionTest] DIAG-LCMEMTX Err#
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 264
    ). This Port M connection to Port M connection is not allowed by the test Reconnect port (M) to another port (N) and re-execute test 264 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 265
    Table 18. Diagnostic Error Messages (continued) Message Description Probable Cause Action DIAG-PORTSTOPPED Err#3874 [spinSilk] Port is no longer transmitting, as indicated by the Number Of Frames Transmitted counter being stuck at N frames ASIC, GBIC Replace module, or fibre mainboard cable
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 266
    DIAG-XMIT Err#2271, 2671, 3071, 3871 Port failed to transmit frame ASIC failure Replace mainboard assembly [portLoopbackTest, crossPortTest, spinSilk, camTest] 266 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 267
    The switch configuration OS error information has grown too large to be saved or has an invalid size. Contact customer support CONFIG VERSION The switch has encountered an unrecognized version of the switch configuration. OS error System automatically reverts to default configuration
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 268
    Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support OS error The system attempts to recover from its mirrored backup. Contact customer support. OS error Contact customer support 268 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 269
    LSDB, LSID, LOG_ERROR Link State ID out of range OS error Contact customer support LSDB, MAXINCARN, LOG_WARNING Local Link State Record reached OS error maximum incarnation Contact customer support LSDB, NOLOCALENTRY, LOG_CRITICAL No database entry for local Link OS error State Record
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 270
    , TASKSPAWN, LOG_PANIC Task creation failed OS error Contact customer support PANIC, SEMCREATE, LOG_PANIC Semaphore creation failed OS error Contact customer support PANIC, SEMDELETE, LOG_PANIC Semaphore deletion failed OS error Contact customer support 270 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 271
    PANIC, LSDB_CKSUM, Link State Database checksum OS error LOG_PANIC failed Contact customer support POWER, 1_FAILED, LOG_CRITICAL Switch power failure Power supply Contact customer failure support POWER, 2_FAILED, LOG_CRITICAL Switch power failure Power supply Contact customer failure
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 272
    customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support Contact customer support 272 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 273
    support Fan Failure Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support OS error Contact customer support
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 274
    274 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 275
    6164 Commands" on page 279 Note For detailed information about the telnet commands for Zoning, Quickloop, Extended Fabrics, or Fabric Watch, see the specific user's guide for that feature. 275
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 276
    For detailed information about these commands, see the Zoning User's Guide. Table 20. Zoning Commands Command Zone Alias aliAdd aliCreate aliDelete QuickLoop. Creates a QuickLoop. Deletes a QuickLoop. Removes a member from a QuickLoop. Shows QuickLoop information. 276 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 277
    . cfgTransAbort Aborts the current zoning transaction. QuickLoop Commands For detailed information about these commands, see the QuickLoop User's Guide. Table 21. QuickLoop Commands Command Description qlDisable Disables QuickLoop mode on the switch. qlEnable Enables QuickLoop mode on the
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 278
    , see the Distributed Fabrics User's Guide. Table 22. Extended Fabric Commands Command Description portCfgLongDistance Configures a port to support long distance links. Fabric Watch Commands status. fwShow Displays the thresholds monitored by Fabric Watch. 278 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 279
    commands, see the HP Surestore FC Switch 6164 Installation and Reference Guide. Table 24. FC 6164 Commands Command Description islTopoCheck Displays ISL switch sgroupSupportShow Displays information about the FC 6164 switch for support purposes. sgroupSwReplace Replaces a member of a switch
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 280
    280 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 281
    Defined protocol that allows applications to interface with a set of services. A fibre channel transport structured as a loop. Allows communication . Requires successful arbitration by a port before a circuit is established. Supports up to 126 devices and 1 fabric attachment. Similar to a "shared
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 282
    two virtual circuits that transmit in opposite directions. See also Link. A connection-oriented service that provides a dedicated connection between two ports, with notification of delivery or non- specify character alignment within a data stream. See also K28.5. 282 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 283
    and negative disparity a majority of zeros. The combined user's guides for Extended Fabrics and Remote Switch. Not a software product. Dynamic a fabric. Usually automatically assigned by the switch, but can also be assigned manually. Can be any value between 1 and 239. Error Detect Time-out Value.
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 284
    The number of receive buffers allocated by recipient port to originating port. Used by Class 1 and 2 services to manage exchange of frames across intervening ports in fabric. See also End-to-end flow control, BB_Credit , SCSI FCP maps SCSI-3 onto fibre channel. 284 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 285
    standard, second generation. Specifies tools and algorithms for interconnection and initialization of fibre channel switches. Protocol service that supports communication between fibre channel service providers. See also FSP. A word transmitted to keep a fibre active. Either an idle or ARB ordered
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 286
    if possible, and dropped if not. Interswitch Link. Fibre channel link from the E_Port of one switch to the E_Port of another. Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 287
    IU JBOD K28.5 L_Port Latency Link Link services LIP Loop failure Loop initialization Loop_ID Looplet LPSM LWL MIB access to an arbitrated loop. Long wavelength fibre-optic cable. Based on 1300 nm lasers supporting 1.0625 Gbps link speeds. Connectors are color-coded blue. See also SWL. Management
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 288
    fibre channel standards, and existing at a well-known address. Also called Simple Name Server, SNS, or directory service. See also FS. Node Loop Port. An N_Port that can use loop protocol. See also N_Port, Nx_Port. connected by a direct link. See also Topology. 288 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 289
    is rebooted or reset. NL_Port that does not log into the fabric and communicates only with private NL_Ports in same loop. Device that supports arbitrated loop protocol and understands 8-bit addresses, but cannot log into fabric. An arbitrated loop with no fibre channel attachment. A defined method
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 290
    frames. Usually automatically assigned by the switch, but can be manually assigned by administrator. Arbitrary name assigned to switch by administrator. See Domain_ID. Short wavelength fiber-optic cable. Based on 850 nm lasers supporting 1.0625 Gbps link speeds. Connectors are color-coded black. See
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 291
    Trap (SNMP) Tunneling U_Port ULP Unicast Web Tools Well-known address WWN Zone Zone configuration Zoning Message sent by SNMP agent to inform SNMP management station of critical error. See also SNMP. Technique for enabling source and destination hosts to communicate when on same type of network but
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 292
    292 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 293
    A agtcfgDefault 13 agtcfgSet 16 agtcfgShow 19 aliasShow 22 B BadEOF 262 BadOrdSet 262 bcastShow 24 C camTest 26 centralMemoryTest 27 cmemRetentionTest 29 cmiTest 30 configDefault 32 configDownload 33 configShow 36 configUpload 38 configure 40 CRC_err 262 crossPortTest 49 INDEX D date 55
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 294
    portLogClear 158 portLogDump 159 portLogShow 161 portLoopbackTest 170 portPerfShow 173 portRegTest 174 portRouteShow 176 portShow 179 portStatsShow 182 POST 252 psShow 185 Fabric OS Reference Manual
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 295
    206 software, updates 12 spinSilk 207 sramRetentionTest 212 support, technical 12 supportShow 214 switchBeacon 217 switchDisable 218 system error message formats 250 system error messages 267 T technical support 12 tempShow 235 timeOut 236 topologyShow 237 trackChangesSet 239 TruncFrm 262
  • HP Surestore 6164 | Fabric OS Reference Manual - Page 296
    296 Fabric OS Reference Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
reference manual
version 2.4
Fabric OS
www.hp.com