HP Surestore 6164 Fabric OS Reference Manual - Page 193
To enable or disable a 2-port loopback, Specify 1 to enable GBIC mode or 0 to disable SPLB
View all HP Surestore 6164 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Operands This command has the following operand: mode Specify whether to enable or disable SPLB mode. Specify 1 to enable GBIC mode or 0 to disable SPLB mode. The default value (if no operand specified) is 0. Example To enable or disable a 2-port loopback: switch:admin> setSplbMode 1 Committing configuration...done. SPLB mode is now ON. switch:admin> setSplbMode 0 Committing configuration...done. SPLB mode is now OFF. See Also setGbicMode spinSilk Telnet Commands 193
Telnet Commands
193
Operands
This command has the following operand:
mode
Specify whether to enable or disable SPLB mode.
Specify 1 to enable GBIC mode or 0 to disable SPLB
mode. The default value (if no operand specified) is
0
.
Example
To enable or disable a 2-port loopback:
See Also
setGbicMode
spinSilk
switch:admin> setSplbMode 1
Committing configuration...done.
SPLB mode is now ON.
switch:admin> setSplbMode 0
Committing configuration...done.
SPLB mode is now OFF.