HP VP17 User Guide - Page 30

Operating the Monitor OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: ■ Cancel - to return to the previous menu level. ■ Save and Return - to save all changes and return to the OSD Main Menu screen. This Save and Return option is active only if you change a menu item. ■ Reset - to change back to the previous setting. Icon Main Menu Options Submenu Options Switch Video Input (select models only) Brightness Description Switches the video input signal source when the monitor is connected to two active and valid video sources. Switching video input sources may take several seconds. Adjusts the brightness level of the screen. Contrast Adjusts the contrast level of the screen. Image Control Auto-Adjustment Horizontal Position Vertical Position Adjusts the screen image. Also enables or disables the ambient light sensor (select models only). Automatically adjusts the screen image (VGA Input only). Adjusts the horizontal position of the picture (VGA Input only). Adjusts the vertical position of the picture (VGA Input only). Custom Scaling (select models only) Sharpness (select models only) Ambient Light Sensor (select models only) Clock Clock Phase Selects the method on how displayed information on the monitor will be formatted. Select: Fill to Screen - Image fills the entire screen and might look distorted or elongated because of non-proportional scaling of height and width. Fill to Aspect Ratio - Image is sized to fit the screen and maintains proportional image. On a scale of 1 to 5, adjusts the screen image to look sharper or softer. ✎ NOTE: If the one-to-one custom scaling menu is selected, scaling is disabled and the Sharpness feature is as well. Adjusts the brightness of the screen depending on the ambient light of the environment. The sensor is on the left front of the monitor. By default the sensor is set to On. If you adjust the Quick View, Brightness, Contrast, or sRGB functions in the OSD, the ambient light sensor will automatically be disabled. Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock will also change the horizontal screen image (VGA Input only). Adjusts the focus of the display. This adjustment allows you to remove any horizontal noise, and clear or sharpen the image of characters (VGA Input only). 4-4 User's Guide