HP Wireless USB Network Adapter hn210w HP Wireless USB Network hn210w - (Engli - Page 15
troubleshooting
View all HP Wireless USB Network Adapter hn210w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
troubleshooting My computer does not recognize the Wireless USB Network Adapter. ❑ Verify that the USB cable is properly connected to both the Type B USB adapter port and the Type A USB computer port. ❑ Verify that the USB controller is enabled in the computer's BIOS. Check your computer's documentation for more information. The Wireless USB Network Adapter does not work properly. ❑ Reinsert the adapter's USB cable into the computer's USB port. ❑ Verify that the adapter is installed properly: 1 Right-click My Computer. 2 Select Properties. 3 Select the Hardware tab, click Device Manager, and double-click Network Adapters. If the adapter is installed properly, it will be displayed. If you see a yellow exclamation point, there may be a resource conflict. If so, do the following: ❑ Uninstall the drive software from your PC. ❑ Restart your PC. ❑ Repeat the adapter's software installation. My computer cannot communicate with computers linked via Ethernet to the wireless network in the infrastructure configuration. ❑ Verify that the computer you are trying to contact is powered on. ❑ Verify that your adapter is configured for the same channel, SSID, and WEP as the other computers in the infrastructure configuration. 15