HP Xw8200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 63

container Commands Parameters {container} Specifies the ID number (0 to 63) of the array from which you want to create the multilevel stripe set. {container}... Specifies the ID number or numbers (0 to 63) of one or more arrays from which you want to create the multilevel stripe set. You can use up to 16 arrays to create a multilevel stripe set. All specified arrays must be the same size as the first container parameter and separated by blank spaces. Switches /stripe_size{=integer} Specifies the stripe size for the multilevel stripe set. Valid values are 16 KB, 32 KB, and 64 KB. If you do not specify the switch, it defaults to 64 KB. /label{=string} Specifies a label to be assigned to the newly created multilevel stripe set. You can specify a maximum of sixteen characters for the label. If you do not specify the switch, it defaults to no label. If you do not specify a label, you can do so later by using the container set label command. 5-15