HP Z210 HP Z210 CMT Workstation Maintenance and Service Guide - Page 75
Disassembly order, Removing the cable lock (optional), If a cable lock is installed on the workstation
View all HP Z210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Disassembly order For convenience, disassembly procedures should be followed in a particular order. Use the following table to determine the sequence in which to access major workstation components. Table 5-3 Workstation component installation To install/replace... Remove... Then remove... Then remove... Then remove... Then remove... Battery, front bezel, hard drive, memory, power supply, rear system fan, side access panel sensor, or solenoid lock Chassis lock Side access panel Processor Chassis lock Side access panel Heatsink Expansion card (PCI/PCIe) Chassis lock Side access panel Expansion card Expansion card support slot cover Front panel I/O assembly, optical bay filler, optical drive, power button assembly, or system speaker Chassis lock Side access panel Front bezel System board Chassis lock Side access panel Expansion card Expansion Heatsink support cards or DIMMs Removing the cable lock (optional) If a cable lock is installed on the workstation, remove it before servicing the workstation. ENWW Removing and installing components 63