HP dx2355 Hardware Reference Guide: HP Compaq Business Desktops dx2355 Microto - Page 20

Removing a 5.25\, Removing the, Computer Access Panel, Removing the Front Bezel

Get HP dx2355 - Microtower PC PDF manuals and user guides View all HP dx2355 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Hardware Upgrades Removing a 5.25" Drive Bezel Blank If the computer was not shipped with a drive in the 5.25" option bay, the bay will be covered by a bezel blank. If you add a drive to the option bay, you must first remove the bezel blank. 1. Turn off the computer properly through the operating system and turn off any external devices. 2. Disconnect the power cord from the power outlet and the computer, and disconnect any external devices. 3. Remove the access panel and front bezel. Refer to "Removing the Computer Access Panel" and "Removing the Front Bezel". 4. While facing the inside of the front bezel, press the two retaining tabs on the right towards the outer edge of the bezel 1 and pull the bezel blank inwards to remove it 2. Removing a Bezel Blank ✎ To install a bezel blank, slide the left side of the blank into the two retainer slots on the left side of the front bezel then snap the right side of the blank into place. Hardware Reference Guide www.hp.com 2-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Hardware Reference Guide
www.hp.com
2–10
Hardware Upgrades
Removing a 5.25" Drive Bezel Blank
If the computer was not shipped with a drive in the 5.25" option bay,
the bay will be covered by a bezel blank. If you add a drive to the
option bay, you must first remove the bezel blank.
1. Turn off the computer properly through the operating system and
turn off any external devices.
2. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
3.
Remove the access panel and front bezel. Refer to
“Removing the
Computer Access Panel”
and
“Removing the Front Bezel”
.
4. While facing the inside of the front bezel, press the two retaining
tabs on the right towards the outer edge of the bezel
1
and pull
the bezel blank inwards to remove it
2
.
Removing a Bezel Blank
✎
To install a bezel blank, slide the left side of the blank into the two
retainer slots on the left side of the front bezel then snap the right side
of the blank into place.