HP dx2355 Hardware Reference Guide: HP Compaq Business Desktops dx2355 Microto - Page 37

Connect the external cables to the installed card, if needed., cover lock.

Get HP dx2355 - Microtower PC PDF manuals and user guides View all HP dx2355 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Hardware Upgrades 5. If replacing or adding a new expansion card, hold the card just above the expansion slot on the system board then move the card toward the rear of the chassis 1 so that the bottom of the bracket on the card slides into the small slot on the chassis. Gently press the card straight down into the expansion slot on the system board 2. Replacing or Adding an Expansion Card 6. While holding the expansion card bracket against the chassis, slide the slot cover lock down toward the expansion card bracket to secure it in place and replace the screw that secures the slot cover lock. 7. Connect the external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 8. Replace the computer access panel and reconnect the power cable. ✎ When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. Hardware Reference Guide www.hp.com 2-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Hardware Reference Guide
www.hp.com
2–27
Hardware Upgrades
5. If replacing or adding a new expansion card, hold the card just
above the expansion slot on the system board then move the card
toward the rear of the chassis
1
so that the bottom of the bracket
on the card slides into the small slot on the chassis. Gently press
the card straight down into the expansion slot on the system
board
2
.
Replacing or Adding an Expansion Card
6. While holding the expansion card bracket against the chassis,
slide the slot cover lock down toward the expansion card bracket
to secure it in place
and replace the screw that secures the slot
cover lock.
7. Connect the external cables to the installed card, if needed.
Connect internal cables to the system board, if needed.
8. Replace the computer access panel and reconnect the power
cable.
✎
When installing an expansion card, press firmly on the card so that
the whole connector seats properly in the expansion card slot.