HP nw8240 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance and Se - Page 143
away from the socket at a 45-degree angle., Remove the Mini PCI communications module by pulling
View all HP nw8240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Removal and Replacement Procedures ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables. 4. Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications module. 5. Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications module. (The edge of the module opposite the socket rises away from the computer.) 6. Remove the Mini PCI communications module by pulling the module 3 away from the socket at a 45-degree angle. ✎ Mini PCI communications modules are designed with a notch 4 to prevent incorrect installation. Removing a Mini PCI Communications Module Reverse the above procedure to install a Mini PCI communications module. Maintenance and Service Guide 6-41