HP nw8240 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance and Se - Page 162
Remove the two T8M2.0×4.0 screws, system board to the system board frame.
View all HP nw8240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Removal and Replacement Procedures 2. Disconnect the following cables from the system board: 1 Audio connector board cable 2 USB connector board cable 3 Serial connector board cable 4 Modem cable 3. Remove the two T8M2.0×4.0 screws 5 that secure the system board to the system board frame. Disconnecting the System Board Cables 6-60 Maintenance and Service Guide
6–60
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the following cables from the system board:
1
Audio connector board cable
2
USB connector board cable
3
Serial connector board cable
4
Modem cable
3. Remove the two T8M2.0×4.0 screws
5
that secure the
system board to the system board frame.
Disconnecting the System Board Cables